Cameron Sino Battery for Biosealer CR6 170-2040 3700mAh 88.80Wh
Replacement battery for Biosealer CR6 medical devices, 3700mAh at 24.0V with ISO9001, RoHS and CE certification
- Specifications168.30 x 69.10 x 34.00
- Battery Pack168.30 x 69.10 x 34.00
- Battery Capacity3700 milliamp_hours
- Replacement battery for Biosealer CR6 medical devices
- 3700mAh capacity delivering 88.80Wh at 24.0V
- ISO9001, RoHS and CE certified for safety
- Fully decoded chip works like the original battery
- Overcharge, over-discharge, over-voltage and short-circuit protection built in
Direct replacement for Biosealer CR6
This battery matches the Biosealer CR6 and part number 170-2040. It is a new, rechargeable unit built to the original specifications with a fully decoded chip. Certifications include ISO9001, RoHS and CE. Installation videos are widely available for guidance.
3700 mAh capacity and 88.80 Wh energy
The pack delivers 3700 milliamp-hours at 24.0 volts. It powers the sealer through normal procedures and supports extended sessions before recharge. Runtime drops when the device runs at maximum output continuously. Recharging after two or three full cycles restores full capacity.
Thermals and protection in clinical use
The housing measures 168.30 by 69.10 by 34.00 mm and weighs 1009.2 grams. Built-in circuitry guards against overcharge, over-discharge, over-voltage and short circuits. Shock-absorbing foam protects the pack during transport. Do not store above 60 degrees Celsius.
Highlights
- Replacement battery for Biosealer CR6 medical devices
- 3700mAh capacity delivering 88.80Wh at 24.0V
- ISO9001, RoHS and CE certified for safety
- Fully decoded chip works like the original battery
- Overcharge, over-discharge, over-voltage and short-circuit protection built in
Specifications
| Brand | cameron Sion |
|---|---|
| Model | Biosealer CR6 |
| Part Number | Biosealer 170-2040 |
| Specifications | 168.30 x 69.10 x 34.00 |
| Battery Pack | 168.30 x 69.10 x 34.00 |
| Battery Capacity | 3700 milliamp_hours |
Questions about this item
Will this battery fit the existing Biosealer CR6 bay and connector without modification?
The pack measures 168.30 x 69.10 x 34.00 mm and matches the original Biosealer 170-2040 form factor so it slots into the CR6 bay and plugs into the same connector.
How can I confirm the replacement battery is functioning correctly after the first charge?
The fully decoded chip reports capacity and voltage to the device; after 2 or 3 full charge and discharge cycles the CR6 should show 3700 mAh and 24.0 V with normal run time.
Does the box include a charger or any installation tools for the Biosealer CR6?
Only the battery with protective foam is supplied; the CR6 uses its own charger and no tools are required for the connector swap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



