Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00996236BTC
In stock
Cameron Sino Battery for BCI SpectrO2 20/10/30 Pulse Oximeters PN DI5070/WW1090 2600mAh 7.4V
Replacement nickel-zinc battery pack for BCI SpectrO2 10, 20 and 30 pulse oximeters, 2600 mAh at 7.4 V
- Specifications70.24 x 50.05 x 22.10
- Typenickel_zinc
- Battery Pack70.24 x 50.05 x 22.10
- Battery Typenickel_zinc
- Battery Capacity2600.00 milliamp_hours
- Battery Voltage7.40 volts
- 2600 mAh capacity powers extended monitoring sessions
- 4 V output matches original SpectrO2 specifications
- Nickel-zinc chemistry delivers stable voltage for medical use
- 24 × 50.05 × 22.10 mm form factor fits SpectrO2 10, 20, 30 units
- ISO 9001, RoHS and CE certified for clinical environments
Replacement battery for BCI SpectrO2 pulse oximeters
This nickel-zinc battery pack replaces the original power source in BCI SpectrO2 20, 10 and 30 pulse oximeters. It delivers 2600mAh at 7.4 volts and matches the 70.24 x 50.05 x 22.10 millimetre form factor. A fully decoded chip ensures the meter reads capacity and status exactly as it would with the factory cell. The pack weighs 111.1 grams and is certified to ISO9001, RoHS and CE standards.
Protection circuits and packaging changes
Integrated over-charge, over-discharge, over-voltage and short-circuit protection guards both the battery and the oximeter during daily clinical use. The shipping carton includes shock-absorbing foam that prevents impact damage in transit. No additional accessories, cables or software are bundled with the cell.
Suits biomedical technicians maintaining BCI
Technicians who need a direct-fit replacement with the original voltage, capacity and dimensions will find this pack compatible. Buyers whose devices use a different part number or chemistry should verify specifications before ordering. Facilities requiring hot-swap charging cradles or multi-bay chargers will not find those features here.
Highlights
- 2600 mAh capacity powers extended monitoring sessions
- 4 V output matches original SpectrO2 specifications
- Nickel-zinc chemistry delivers stable voltage for medical use
- 24 × 50.05 × 22.10 mm form factor fits SpectrO2 10, 20, 30 units
- ISO 9001, RoHS and CE certified for clinical environments
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | SpectrO2 20, SpectrO2 10, SpectrO2 30, SpectrO2 Pulse Oximeters |
| Part Number | DI5070, WW1090 |
| Specifications | 70.24 x 50.05 x 22.10 |
| Type | nickel_zinc |
| Battery Pack | 70.24 x 50.05 x 22.10 |
| Battery Type | nickel_zinc |
| Battery Capacity | 2600.00 milliamp_hours |
| Battery Voltage | 7.40 volts |
Questions about this item
How often will the nickel-zinc cells need replacing under normal medical use?
The 2600mAh nickel-zinc pack is rated for hundreds of cycles; after 2 to 3 full charge and discharge cycles it reaches peak capacity and then gradually declines, so plan a replacement when run-time drops below clinical requirements.
What limits continuous operation on a single charge?
The 19.24Wh capacity at 7.4V sets the energy ceiling; sustained monitoring draws the pack down until the built-in protection circuit cuts output to prevent over-discharge.
Does the pack run hot or draw extra power during all-day shifts?
Nickel-zinc chemistry generates minimal heat at the 7.4V nominal voltage, and the integrated protection board prevents over-voltage and short-circuit conditions that could raise temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
