Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00994924BTC
In stock
Cameron Sino Battery for Artex ELT 110-4, ELT-200 17000mAh
Replacement battery for Artex ELT 110-4 and ELT-200 emergency locators, 17000mAh capacity with ISO9001, RoHS and CE certification
- Specifications245.80 x 78.05 x 39.26
- Battery Pack245.80 x 78.05 x 39.26
- Battery Capacity17000.00 milliamp_hours
- Replaces Artex ELT 110-4 and ELT-200 emergency locator batteries
- 17000mAh capacity delivers 153.00Wh for extended standby power
- Certified to ISO9001, RoHS and CE safety standards
- Fully decoded chip matches original battery communication
- Shock-absorbing foam packaging protects cells during transport
Direct Replacement for Artex ELTs
This lithium-ion battery replaces Artex part numbers 452-0130, 452-3063, 453-0190 and BP-1015. It fits the ELT 110-4 and ELT-200 emergency locator transmitters. The pack delivers 17000mAh at 9.0 volts and meets ISO9001, RoHS and CE certification standards.
Installs in Existing ELT Housing
The unit measures 245.80 x 78.05 x 39.26 mm and weighs 922.2 g, matching the original mechanical envelope. No adapter cables or firmware updates are required; the decoded chip communicates with the transmitter exactly as the factory cell did. Installation videos are widely available online.
153.00 Wh Capacity for Extended Operation
At 153.00 Wh the pack supports long-duration emergency transmission cycles. Capacity is sufficient for typical beacon deployment periods but will not cover unlimited back-to-back activations without recharge. The battery is not suited for non-aviation devices or for transmitters using different part numbers.
Highlights
- Replaces Artex ELT 110-4 and ELT-200 emergency locator batteries
- 17000mAh capacity delivers 153.00Wh for extended standby power
- Certified to ISO9001, RoHS and CE safety standards
- Fully decoded chip matches original battery communication
- Shock-absorbing foam packaging protects cells during transport
Specifications
| Brand | cameron sino |
|---|---|
| Model | Artex ELT 110-4 ELT-200 |
| Part Number | Artex 452-3063 453-0190 452-0130 BP-1015 |
| Specifications | 245.80 x 78.05 x 39.26 |
| Battery Pack | 245.80 x 78.05 x 39.26 |
| Battery Capacity | 17000.00 milliamp_hours |
Questions about this item
How long will the 17000mAh capacity last during continuous emergency transmission?
The 17000mAh / 153.00Wh lithium-ion pack is sized to meet the ELT 110-4 and ELT-200 regulatory discharge requirements; exact on-air time depends on the beacon's transmission cycle and temperature.
Does the battery run hot or make noise when powering the ELT for a full day?
The sealed lithium-ion cell produces no audible noise and minimal heat under normal ELT standby and transmission loads; the housing is rated for storage up to 60 °C / 140 °F.
What must already be on the aircraft for this battery to install and function?
You need an Artex ELT 110-4 or ELT-200 unit with the original connector matching part numbers 452-0130, 452-3063, 453-0190 or BP-1015, plus the standard mounting hardware used for the original pack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
