Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.0099484BTC
In stock
Cameron Sino Battery Anbernic RG Nano FL_503350 1000mAh 3.7V
Replacement lithium-polymer battery for the Anbernic RG Nano, 1000 mAh at 3.7 V with a fully decoded chip and built-in protection circuits
- Specifications52.00 x 34.10 x 5.40
- Typelithium_polymer
- Battery Pack52.00 x 34.10 x 5.40
- Battery Typelithium_polymer
- Battery Capacity1000 milliamp_hours
- Battery Voltage3.7 volts
- Drop-in replacement for Anbernic RG Nano
- 1000 mAh capacity keeps handheld running longer
- 7 V lithium-polymer chemistry matches original spec
- Compact 52.00 x 34.10 x 5.40 mm fits battery bay
- Built-in protection guards against over-charge and short circuits
Replacement battery for Anbernic RG Nano
This lithium-polymer cell is built to the original specifications for the Anbernic RG Nano handheld. It carries part number FL_503350 and fits the device without modification. The pack includes a fully decoded chip that communicates with the console exactly like the factory battery. Installation is straightforward and supported by widely available video guides.
Critical compatibility: part number FL_503350
The only specification that determines fit is the Anbernic part number FL_503350 printed on your existing battery. Matching this code confirms the connector, dimensions and voltage are correct for your unit. Buyers who cannot verify that number on the original cell should not order this pack.
Capacity and practical limits
Rated at 1000 mAh and 3.7 V, the battery restores the handheld’s original runtime for typical gaming sessions. It delivers full performance after two or three complete charge cycles. The protection circuit guards against over-charge, over-discharge and short circuits, but the cell will still degrade with age and cannot extend play time beyond the hardware’s design envelope.
Highlights
- Drop-in replacement for Anbernic RG Nano
- 1000 mAh capacity keeps handheld running longer
- 7 V lithium-polymer chemistry matches original spec
- Compact 52.00 x 34.10 x 5.40 mm fits battery bay
- Built-in protection guards against over-charge and short circuits
Specifications
| Brand | cameron sino |
|---|---|
| Model | Anbernic RG Nano |
| Part Number | Anbernic FL_503350 |
| Specifications | 52.00 x 34.10 x 5.40 |
| Type | lithium_polymer |
| Battery Pack | 52.00 x 34.10 x 5.40 |
| Battery Type | lithium_polymer |
| Battery Capacity | 1000 milliamp_hours |
| Battery Voltage | 3.7 volts |
Questions about this item
What runtime can I expect from the 1000 mAh capacity in the Anbernic RG Nano?
The 1000 mAh cell matches the original specification, so runtime will be the same as when the console was new; actual hours depend on screen brightness, volume and the game being played.
Does the 3.7 V lithium-polymer pack use the original connector and pin-out for the RG Nano?
Yes, the fully decoded chip and connector are built to the exact FL_503350 specification, so it plugs straight into the board without adapters.
Will the 52.00 x 34.10 x 5.40 mm dimensions fit the RG Nano battery compartment?
Those measurements are identical to the factory battery, so the pack sits flush in the compartment and the cover closes normally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
