Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00994924BTC
In stock
Cameron Sino 9.6V 3500mAh battery for AEMC 1060 4630 5050 5060 5070 6470 6471 6472 6505
Replacement 9.6 V 3500 mAh lithium-ion pack for AEMC 1060, 4630, 5050, 5060, 5070, 6470, 6471, 6472 and 6505 instruments
- Specifications202.10 x 50.52 x 17.15
- Battery Pack202.10 x 50.52 x 17.15
- Battery Capacity3500 milliamp_hours
- Battery Voltage9.6 volts
- 3500 mAh capacity extends field use between charges
- 6 V output matches original AEMC instrument requirements
- Fits ten AEMC models including 1060, 4630, 5050, 5060, 5070, 6470, 6471, 6472, 6472 Micro-Ohmmeter, 6505
- ISO 9001, RoHS and CE certified for safety and compliance
- 10 x 50.52 x 17.15 mm form factor drops straight into existing battery bay
Replacement Battery for AEMC Test Instruments
This 9.6 V 3500 mAh lithium-ion pack replaces the original battery in AEMC models 1060, 4630, 5050, 5060, 5070, 6470, 6470/6470-B, 6471, 6472, 6472 Micro-Ohmmeter and 6505. It matches part numbers 2960.21 and 525832D00 and carries ISO 9001, RoHS and CE certification. The fully decoded chip communicates with the host device exactly like the factory unit.
Thermals, Noise and Power Draw
As a passive battery pack it produces no audible noise and draws no power while idle. During discharge it delivers up to 33.60 Wh at 9.6 V with built-in protection against over-charge, over-discharge, over-voltage and short-circuit conditions. Normal operating temperature must stay below 60 °C (140 °F) to maintain safety and longevity.
Build Integration and Clearance
The pack measures 202.10 mm by 50.52 mm by 17.15 mm and weighs 405.5 g, fitting the existing battery compartment without modification. A new unit reaches full capacity after two or three complete charge cycles. Installers must verify the connector orientation before seating the pack and should avoid low-quality third-party chargers that can reduce service life. Buyers needing a different voltage or a higher capacity cell will need an alternative solution.
Highlights
- 3500 mAh capacity extends field use between charges
- 6 V output matches original AEMC instrument requirements
- Fits ten AEMC models including 1060, 4630, 5050, 5060, 5070, 6470, 6471, 6472, 6472 Micro-Ohmmeter, 6505
- ISO 9001, RoHS and CE certified for safety and compliance
- 10 x 50.52 x 17.15 mm form factor drops straight into existing battery bay
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | 1060, 4630, 5050, 5060, 5070, 6470, 6470/6470-B, 6471, 6472, 6472 Micro-Ohmmeter, 6505 |
| Part Number | 2960.21, 525832D00 |
| Specifications | 202.10 x 50.52 x 17.15 |
| Battery Pack | 202.10 x 50.52 x 17.15 |
| Battery Capacity | 3500 milliamp_hours |
| Battery Voltage | 9.6 volts |
Questions about this item
How do I install the 9.6 V 3500 mAh pack into my AEMC 6472 Micro-Ohmmeter, and what step is often missed?
Slide the pack into the battery compartment, align the 202.10 x 50.52 x 17.15 mm housing, and press the connector firmly until it clicks; the step most people miss is fully seating that connector before closing the door.
What maintenance will this lithium-ion 3500 mAh cell need later?
No scheduled maintenance is required; store it below 60 °C, avoid full discharge, and recharge every few months if the instrument sits unused.
What limit appears first during continuous testing with the 33.60 Wh pack?
The 3500 mAh capacity sets the run-time ceiling; under sustained load the voltage will sag toward the protection threshold and the meter will shut down.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
