We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino 850.0034 Battery BGN1300-5AWP-3202EC 1500mAh 6.0V

SKU CH-QWJQ-NKN7F

Lithium-polymer replacement battery for Kaufel emergency lighting models 850.0034 and BGN1300-5AWP-3202EC, delivering 1500mAh at 6.0V

  • Specifications168.20 x 25.20 x 22.40
  • Typelithium_polymer
  • Battery Pack168.20 x 25.20 x 22.40
  • Battery Typelithium_polymer
  • Battery Capacity1500.00 milliamp_hours
  • Battery Voltage6.00 volts
  • 1500 mAh capacity powers devices longer
  • 0 V output matches original specifications
  • Lithium polymer chemistry delivers reliable energy storage
  • ISO 9001, RoHS and CE certified for safety
  • 20 × 25.20 × 22.40 mm form factor fits Kaufel 850.0034

Cameron Sino 850.0034 replacement battery

This lithium-polymer pack delivers 1500mAh at 6.0V for Kaufel 850.0034 emergency-lighting units. It matches the original BGN1300-5AWP-3202EC part number and fits the 168.20 x 25.20 x 22.40mm footprint. The integrated protection circuit guards against overcharge, over-discharge and short circuits. ISO9001, RoHS and CE certifications confirm compliance.

Direct swap for the original Kaufel cell

Install this pack when the factory battery no longer holds a charge or shows reduced runtime. The fully decoded chip communicates with the host exactly like the original, so no firmware work is needed. A jump is worth it when the emergency light fails its duration test or the charger reports a fault code. Two to three full cycles bring the new cell to rated capacity.

Limited to 6.0V emergency-lighting systems

The pack operates only in devices designed for a 6.0V lithium-polymer source with the specified connector layout. It cannot power tools, laptops or higher-voltage lighting arrays. Physical dimensions and pin-out must match the host cavity exactly; otherwise the pack will not seat or connect. No series or parallel configuration is supported.

Highlights

  • 1500 mAh capacity powers devices longer
  • 0 V output matches original specifications
  • Lithium polymer chemistry delivers reliable energy storage
  • ISO 9001, RoHS and CE certified for safety
  • 20 × 25.20 × 22.40 mm form factor fits Kaufel 850.0034

Specifications

BrandCameron Sino
Model850.0034
Part NumberBGN1300-5AWP-3202EC
Specifications168.20 x 25.20 x 22.40
Typelithium_polymer
Battery Pack168.20 x 25.20 x 22.40
Battery Typelithium_polymer
Battery Capacity1500.00 milliamp_hours
Battery Voltage6.00 volts

Questions about this item

Will the 168.20 x 25.20 x 22.40 mm battery pack fit the Kaufel 850.0034 housing?

The pack matches the original dimensions of 168.20 x 25.20 x 22.40 mm and is built to the same specifications as the Kaufel BGN1300-5AWP-3202EC unit.

How is the battery installed and what step is often missed?

Connect the pack's connector firmly to the device terminals; the step many miss is verifying the connector is fully seated before closing the compartment.

When will this 1500 mAh lithium-polymer cell need replacement?

After roughly 300 to 500 full charge cycles the capacity drops noticeably; expect replacement when runtime falls below useful levels for your emergency lighting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.