Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01001555BTC
In stock
Cameron Sino 760ES Scantronic 760SB SDR-R-BAT1 17000mAh 3.0V
Replacement nickel-zinc battery for Eaton 760ES and Scantronic 760SB alarm systems, 17000mAh 3.0V with ISO9001, RoHS and CE certification
- Typenickel_zinc
- Battery Typenickel_zinc
- Battery Capacity17000 milliamp_hours
- Battery Voltage3 volts
- High-capacity 17000 mAh nickel-zinc cell powers Eaton 760ES and Scantronic 760SB alarms
- Exact SDR-R-BAT1 fit replaces the original battery without modification
- 0 V output matches factory specification for reliable alarm operation
- ISO 9001 RoHS and CE certified construction with overcharge and short-circuit protection
- Compact 66.40 x 62.80 x 33.20 mm size and 281.0 g weight installs in standard enclosures
Compatible Alarm Battery Replacement
This nickel-zinc battery replaces the original power source for Eaton 760ES and Scantronic 760SB alarm panels. It matches the SDR-R-BAT1 part number and delivers a 3.0 volt output with a 17000mAh capacity. The unit is designed for indoor security installations that require a direct drop-in replacement.
Sustained Backup Performance
The 51.00Wh energy rating supports extended operation during mains power loss rather than short bursts. A fully decoded chip manages the discharge curve so the panel receives stable voltage throughout the cycle. Capacity reaches its peak after two or three complete charge and discharge sequences.
Thermal Safety And Construction
The pack measures 66.40 x 62.80 x 33.20mm and weighs 281.0g, fitting the original housing without modification. Integrated protection guards against overcharge, over-discharge, over-voltage and short circuits. Shock-absorbing foam in the packaging protects the cells during transport and storage up to 60 140.
Highlights
- High-capacity 17000 mAh nickel-zinc cell powers Eaton 760ES and Scantronic 760SB alarms
- Exact SDR-R-BAT1 fit replaces the original battery without modification
- 0 V output matches factory specification for reliable alarm operation
- ISO 9001 RoHS and CE certified construction with overcharge and short-circuit protection
- Compact 66.40 x 62.80 x 33.20 mm size and 281.0 g weight installs in standard enclosures
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | 760ES alarm, Scantronic 760SB |
| Part Number | SDR-R-BAT1 |
| Type | nickel_zinc |
| Battery Type | nickel_zinc |
| Battery Capacity | 17000 milliamp_hours |
| Battery Voltage | 3 volts |
Questions about this item
Does the 17000mAh nickel-zinc cell run hot during continuous alarm-panel operation?
The pack is rated at 3.0 V and 51.00 Wh; nickel-zinc chemistry typically stays cool under the low steady draw of an alarm system.
Must the installer already have the original Eaton SDR-R-BAT1 connector and mounting hardware?
Yes — the replacement uses the same 66.40 x 62.80 x 33.20 mm form factor and connector, so existing hardware is required.
Will the 281.0 g battery fit the same compartment as the older Eaton 760ES pack?
Dimensions match the original spec exactly, so it slides into the existing 760ES/760SB bay without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
