We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, grey plastic casing, two wire leads, compact size

Cameron Sino 700mAh 8.4V Nickel-Zinc Battery for 6417 Ground Tester PEL 102 103

SKU CH-YKMV-1XBG4

Nickel-zinc 700 mAh 8.4 V replacement cell for 6417 ground testers and PEL 102 or 103 units

  • Specifications55.60 x 45.56 x 18.12
  • Typenickel_zinc
  • Battery Pack55.60 x 45.56 x 18.12
  • Battery Typenickel_zinc
  • Battery Capacity700.00 milliamp_hours
  • Battery Voltage8.40 volts
  • Reliable power for ground-testing instruments with 700 mAh nickel-zinc chemistry
  • Exact-fit replacement for 6417, PEL 102 and PEL 103 testers
  • Certified to ISO 9001, RoHS and CE safety standards
  • Built-in protection against overcharge, over-discharge and short circuits
  • Compact 55.60 x 45.56 x 18.12 mm pack weighing 88.0 g

Replacement Battery for Ground Testers

This nickel-zinc pack replaces the original power source in 6417 Ground Tester, PEL 102 and PEL 103 units. It delivers 700mAh at 8.4V with a 5.88Wh energy rating. A fully decoded chip ensures the tester recognises the battery exactly as it did the factory cell. Dimensions are 55.60 x 45.56 x 18.12mm.

Capacity and Runtime Limits

The 700mAh capacity supports typical field survey sessions without frequent recharging. Voltage holds steady at 8.4V during the bulk of the discharge curve, so readings remain consistent. Runtime shortens when the tester drives backlit displays or continuous measurement modes. The pack is not suited for multi-day logging without access to a charger.

Upgrade From Worn Original Cells

It directly substitutes OEM part numbers 2137.52, 2137.61, 2137.75, 2137.81 and 694483 when the original no longer holds a full charge. The jump is worth it when calibration drift appears or the tester shuts down mid-task. Built-in overcharge, over-discharge and short-circuit protection adds a safety margin the aged cell lacks. Not for devices that require a different voltage or connector layout.

Highlights

  • Reliable power for ground-testing instruments with 700 mAh nickel-zinc chemistry
  • Exact-fit replacement for 6417, PEL 102 and PEL 103 testers
  • Certified to ISO 9001, RoHS and CE safety standards
  • Built-in protection against overcharge, over-discharge and short circuits
  • Compact 55.60 x 45.56 x 18.12 mm pack weighing 88.0 g

Specifications

BrandCameron Sino
Model6417 Ground Tester, PEL 102, PEL 103
Part Number2137.52, 2137.61, 2137.75, 2137.81, 694483
Specifications55.60 x 45.56 x 18.12
Typenickel_zinc
Battery Pack55.60 x 45.56 x 18.12
Battery Typenickel_zinc
Battery Capacity700.00 milliamp_hours
Battery Voltage8.40 volts

Questions about this item

Will the 700mAh 8.4V nickel-zinc pack fit the original 6417 Ground Tester battery compartment?

Yes, the 55.60 x 45.56 x 18.12 mm dimensions match the OEM pack used in the 6417, PEL 102 and PEL 103 testers.

How can I confirm the replacement battery is communicating correctly with my PEL 103 after installation?

The fully decoded chip reports charge status to the tester exactly like the original; the instrument’s battery indicator should show normal readings after two or three full charge cycles.

Does the box include a charger or only the 700mAh 8.4V battery itself?

Only the single battery pack is supplied; a compatible charger for the 6417 or PEL series must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.