We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with dark grey plastic casing and gold connector contacts

Cameron Sino 6800mAh 7.4V Battery BP7240 for Fluke 753 754

SKU CH-VJNW-BBP8K

Replacement lithium-ion battery delivers 6800mAh at 7.4V for Fluke 753, 754, 754 VIP1 and 754 VIP2 models

  • Specifications154.90 x 69.22 x 26.70
  • Typelithium_ion
  • Battery Pack154.90 x 69.22 x 26.70
  • Battery Typelithium_ion
  • Battery Capacity6800.00 milliamp_hours
  • Battery Voltage7.40 volts
  • Extended runtime for Fluke 753 and 754 instruments with 6800mAh capacity
  • 32Wh energy rating supports long survey and test sessions
  • 4V lithium-ion pack matches original BP7240 voltage and form factor
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuit
  • Precisely sized at 154.90 x 69.22 x 26.70mm for direct fit

Compatible replacement for Fluke 753 and 754 series

This 7.4 V lithium-ion pack delivers 6800 mAh and 50.32 Wh, matching the original BP7240 specifications. It is built for Fluke 753, 754, 754 VIP1 and 754 VIP2 process calibrators used in equipment, survey and test applications. A fully decoded chip ensures the meter recognises the battery exactly as the factory unit.

Check your device model

Verify that your calibrator shows model 753, 754, 754 VIP1 or 754 VIP2 and that the original battery carries part number BP7240. The pack measures 154.90 x 69.22 x 26.70 mm, so confirm the compartment accepts those dimensions. A new cell reaches full capacity after two or three complete charge and discharge cycles.

ISO9001, RoHS and CE certified with built

Overcharge, over-discharge, over-voltage and short-circuit safeguards are integrated for safe daily use. The connector mates directly with the Fluke terminal, requiring no soldering or adapter. Installation videos are widely available online. The package includes shock-absorbing foam for transit protection.

Highlights

  • Extended runtime for Fluke 753 and 754 instruments with 6800mAh capacity
  • 32Wh energy rating supports long survey and test sessions
  • 4V lithium-ion pack matches original BP7240 voltage and form factor
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuit
  • Precisely sized at 154.90 x 69.22 x 26.70mm for direct fit

Specifications

BrandCameron Sino
Model753, 754, 754 VIP1, 754 VIP2
Part NumberBP7240
Specifications154.90 x 69.22 x 26.70
Typelithium_ion
Battery Pack154.90 x 69.22 x 26.70
Battery Typelithium_ion
Battery Capacity6800.00 milliamp_hours
Battery Voltage7.40 volts

Questions about this item

Does the BP7240 arrive with any cables or a charger, or do I need to buy those separately?

The package contains the 6800mAh 7.4V lithium-ion battery and protective foam; no charger or cables are included, so you will use your existing Fluke charger.

My Fluke reads 754 VIP2 on the label — is the BP7240 the correct replacement?

Yes, the BP7240 is listed for the 753, 754, 754 VIP1 and 754 VIP2, so it matches your model exactly.

The spec says 50.32Wh — what runtime can I expect in a 754 doing typical survey work?

At 50.32Wh the pack stores roughly the same energy as the original Fluke BP7240, giving comparable field hours per charge.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.