Cameron Sino 6800mAh 3.7V lithium-ion battery for Honeywell 99EXhc 99GX Dolphin 99EX 99EX-BTEC
Replacement lithium-ion battery for Honeywell Dolphin 99EX series scanners, 6800mAh at 3.7V with ISO9001, RoHS and CE certification
- Specifications78.40 x 45.10 x 22.30
- Typelithium_ion
- Battery Pack78.40 x 45.10 x 22.30
- Battery Typelithium_ion
- Battery Capacity6800 milliamp_hours
- Battery Voltage3.7 volts
- 6800 mAh capacity powers extended scanning sessions
- 7 V lithium-ion chemistry matches original specifications
- Direct replacement for Honeywell 99EXhc, 99GX, Dolphin 99EX, 99EX-BTEC
- Certified to ISO 9001, RoHS and CE standards
- Built-in protection against overcharge, over-discharge and short circuits
Ready replacement for Honeywell Dolphin scanners
This Cameron Sino lithium-ion battery replaces the original pack in Honeywell 99EXhc, 99GX, Dolphin 99EX and Dolphin 99EX-BTEC barcode scanners. It matches the OEM part numbers 99EX-BTEC-1 and 99EX-BTES-1 and delivers 6800 mAh at 3.7 volts for a full shift of scanning work.
Exact-fit dimensions and built-in protection
The pack measures 78.40 by 45.10 by 22.30 millimetres and weighs 108.0 grams, so it seats directly in the scanner’s battery bay without adapters. A fully decoded chip communicates with the device exactly like the factory unit, while over-charge, over-discharge, over-voltage and short-circuit circuits guard the cells during daily use.
Steady output with safety certifications
Rated at 25.16 Wh, the battery maintains consistent voltage through a typical workday and meets ISO 9001, RoHS and CE requirements. Normal charging cycles bring the pack to peak capacity after two or three full cycles, and the chemistry is stable up to 60 °C storage temperature.
Highlights
- 6800 mAh capacity powers extended scanning sessions
- 7 V lithium-ion chemistry matches original specifications
- Direct replacement for Honeywell 99EXhc, 99GX, Dolphin 99EX, 99EX-BTEC
- Certified to ISO 9001, RoHS and CE standards
- Built-in protection against overcharge, over-discharge and short circuits
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | 99EXhc, 99GX, Dolphin 99EX, Dolphin 99EX-BTEC |
| Part Number | 99EX-BTEC-1, 99EX-BTES-1 |
| Specifications | 78.40 x 45.10 x 22.30 |
| Type | lithium_ion |
| Battery Pack | 78.40 x 45.10 x 22.30 |
| Battery Type | lithium_ion |
| Battery Capacity | 6800 milliamp_hours |
| Battery Voltage | 3.7 volts |
Questions about this item
What voltage and capacity does this lithium-ion battery provide for the Honeywell Dolphin 99EX series?
It delivers 3.7 volts and 6800 milliamp hours, giving 25.16 watt-hours of energy for the 99EXhc, 99GX, Dolphin 99EX and 99EX-BTEC models.
What are the exact dimensions I need to clear inside the scanner’s battery bay?
The pack measures 78.40 mm long, 45.10 mm wide and 22.30 mm thick, weighing 108.0 grams, so the compartment must accommodate that footprint.
How do I install it and what is the step users most often miss?
Power off the scanner, open the battery latch, insert the pack with the connector aligned, press until it clicks, then close the latch; the step most often missed is fully seating the connector before latching.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
