Cameron Sino 6400mAh 3.7V lithium-ion battery Nivo NPL322+
Replacement lithium-ion battery delivering 6400 mAh at 3.7 V for Nivo and NPL322+ total stations
- Specifications67.90 x 39.50 x 25.60
- Typelithium_ion
- Battery Pack67.90 x 39.50 x 25.60
- Battery Typelithium_ion
- Battery Capacity6400.00 milliamp_hours
- Battery Voltage3.70 volts
- 6400 mAh capacity powers long survey sessions
- 7 V lithium-ion chemistry matches original specifications
- 90 x 39.50 x 25.60 mm form factor fits Nivo total stations directly
- Fully decoded chip communicates with instrument like the factory pack
- ISO 9001, RoHS and CE certified for regulated field use
Replacement battery for Nivo total stations
This 6400mAh 3.7V lithium-ion pack replaces the original NPL322+ cell used in Nivo 1C, 2C, 2M, 3C, 3M, 5C, 5M, C and M total stations. It measures 67.90 x 39.50 x 25.60 mm and weighs 105.0 g. A built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuit. The pack is certified to ISO9001, RoHS and CE.
Suits surveyors needing a direct-fit spare
Field crews who carry a backup for all-day jobs will find the capacity and form factor identical to the factory unit. Buyers whose instrument uses a different voltage, connector or physical envelope should look elsewhere. The pack is not intended for devices outside the listed Nivo and NPL series.
Check instrument model and battery compartment
Verify the part number on your existing cell matches 108571-00, 53708-00, 53708-PRN, 890-0084, 890-0084-XXQ or 993251-MY. Confirm the compartment accepts the 67.90 x 39.50 x 25.60 mm dimensions. Ensure the charger you use supports 3.7V lithium-ion chemistry.
Highlights
- 6400 mAh capacity powers long survey sessions
- 7 V lithium-ion chemistry matches original specifications
- 90 x 39.50 x 25.60 mm form factor fits Nivo total stations directly
- Fully decoded chip communicates with instrument like the factory pack
- ISO 9001, RoHS and CE certified for regulated field use
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Nivo 1C, Nivo 2C, Nivo 2M, Nivo 3C, Nivo 3M, Nivo 5C, Nivo 5M, Nivo C, Nivo C Total Station, Nivo M, Nivo M Total Station, NPL322, NPL-322, NPL322+, NPL-322+ |
| Part Number | 108571-00, 53708-00, 53708-PRN, 890-0084, 890-0084-XXQ, 993251-MY |
| Specifications | 67.90 x 39.50 x 25.60 |
| Type | lithium_ion |
| Battery Pack | 67.90 x 39.50 x 25.60 |
| Battery Type | lithium_ion |
| Battery Capacity | 6400.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
Does the Nivo NPL322+ total station need any extra wiring or adapter to accept this 6400 mAh 3.7 V lithium-ion pack?
No extra wiring or adapter is required; the pack matches the original 67.90 x 39.50 x 25.60 mm form factor and plugs directly into the NPL322+ battery compartment.
Can I keep using my older Nivo 2C or Nivo 5M chargers with this 6400 mAh replacement cell?
Yes, the pack uses the same 3.7 V chemistry and decoded chip as the original 108571-00 and 53708-00 cells, so existing Nivo chargers will charge it normally.
How can I verify the battery is delivering its rated 6400 mAh capacity after the first charge cycle?
Run a full discharge on the total station until shutdown, then check the charger read-out — it should show roughly 23.68 Wh (6400 mAh at 3.7 V) returned during recharge.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



