Cameron Sino 5200mAh 18.5V Li-Po Battery for Ecovacs G1/GX
5200mAh 18.5V lithium-polymer replacement battery fits Ecovacs G1 and GX robotic mowers
- Specifications96.70 x 67.70 x 48.00
- Typelithium_polymer
- Battery Pack96.70 x 67.70 x 48.00
- Battery Typelithium_polymer
- Battery Capacity5200mAh / 96.2Wh
- Battery Voltage18.5 volts
- 5200 mAh capacity powers extended cleaning sessions
- 5 V lithium-polymer chemistry matches original specifications
- 2 Wh energy rating supports longer run times
- Compatible with multiple Ecovacs G1 and GX series models
- Built-in protection guards against overcharge, over-discharge and short circuit
Replacement battery for Ecovacs G1 and GX series
This lithium-polymer pack replaces the original power source in Ecovacs BAIZE, G1-800, G1-800G, GOAT G1, GOAT G1 1600, GOAT GX and GX-600 robotic mowers. It delivers 5200mAh at 18.5 volts for 96.2Wh of energy capacity. The fully decoded chip communicates with the mower electronics exactly as the factory unit does. Buyers who need a different voltage or a higher capacity pack cannot use this model.
Sustained output and protection features
The pack integrates overcharge, over-discharge, over-voltage and short-circuit protection to maintain safe operation during long mowing cycles. A new cell reaches its best runtime after two or three complete charge and discharge cycles. The lithium-polymer chemistry provides steady voltage delivery across the working session without the sudden drops seen in aged original packs.
Straightforward swap with online guidance
Installation videos are widely available and show the connector mating process step by step. The replacement fits the existing battery cavity measuring 96.70 by 67.70 by 48.00 millimetres and weighs 530 grams. Users must verify their original part number against the listed codes before ordering; a mismatched connector will prevent the mower from powering on.
Highlights
- 5200 mAh capacity powers extended cleaning sessions
- 5 V lithium-polymer chemistry matches original specifications
- 2 Wh energy rating supports longer run times
- Compatible with multiple Ecovacs G1 and GX series models
- Built-in protection guards against overcharge, over-discharge and short circuit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | BAIZE, G1-800, G1-800G, GOAT G1, GOAT G1 1600, Goat G1-800G, Goat G1-800W, GOAT GX, Goat O1200 RTK, Goat O800 RTK, GX-600, MPB11, MPB12 |
| Part Number | 201-2201-0903, 201-2325-010, 201-2325-0104, S21-Li-185-5800, S26-LI-180-4000 |
| Specifications | 96.70 x 67.70 x 48.00 |
| Type | lithium_polymer |
| Battery Pack | 96.70 x 67.70 x 48.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 5200mAh / 96.2Wh |
| Battery Voltage | 18.5 volts |
Questions about this item
How much does the 5200mAh 18.5V lithium-polymer pack weigh?
The pack weighs 530g, matching the original specification for the Ecovacs G1 and GX series.
Which original part numbers does this Cameron Sino battery replace?
It replaces Ecovacs part numbers 201-2201-0903, 201-2325-010, 201-2325-0104, S21-Li-185-5800 and S26-LI-180-4000.
Will the 96.70 x 67.70 x 48.00 mm case fit the existing battery bay on a GOAT G1-800G?
Yes, the dimensions are identical to the original pack used in the GOAT G1-800G and other listed models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
