We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark casing, connector on one end

Cameron Sino 5200mAh 14.4V Battery for TSI 8530EP 8533 8533EP 8534

SKU CH-WENV-3J34D

Replacement lithium-ion battery with 5200mAh capacity and 14.4V output for TSI 8530EP, 8533, 8533EP and 8534 equipment

  • Specifications148.32 x 88.35 x 19.56
  • Battery Pack148.32 x 88.35 x 19.56
  • Battery Capacity5200 milliamp_hours
  • Battery Voltage14.4 volts
  • Replaces original TSI LI202SX-6600 with 5200mAh capacity
  • Powers TSI 8530EP, 8533, 8533EP, 8534 at 14.4 volts
  • Certified ISO9001, RoHS and CE for safe operation
  • Includes overcharge, over-discharge and short-circuit protection
  • Fits 148.32 x 88.35 x 19.56 mm battery compartment

Direct Replacement for TSI Survey Gear

This 14.4 V lithium-ion pack replaces the original TSI LI202SX-6600 cell used in the 8530EP, 8533, 8533EP and 8534 analysers. It delivers 5200 mAh and 74.88 Wh from a fully decoded chip that reports capacity to the host exactly like the factory unit. The pack measures 148.32 x 88.35 x 19.56 mm and weighs 418.0 g.

Fits Existing Bay Without Modification

The battery slides into the instrument’s native compartment and connects through the original connector, so no adapter cables or firmware updates are required. Built-in protection guards against over-charge, over-discharge, over-voltage and short circuits, preserving both the pack and the analyser during long field sessions. A new unit reaches full calibration after two or three complete charge cycles.

Upgrades Ageing Packs in 8530-Series Units

Technicians with depleted or swollen original cells regain full runtime for survey and test work without sending the instrument to a service centre. The ISO9001, RoHS and CE certified construction matches OEM safety standards, and the pack ships in shock-absorbing foam to survive transit. It is not suited for devices outside the listed TSI models or for applications demanding a different voltage or form factor.

Highlights

  • Replaces original TSI LI202SX-6600 with 5200mAh capacity
  • Powers TSI 8530EP, 8533, 8533EP, 8534 at 14.4 volts
  • Certified ISO9001, RoHS and CE for safe operation
  • Includes overcharge, over-discharge and short-circuit protection
  • Fits 148.32 x 88.35 x 19.56 mm battery compartment

Specifications

Brandcameron sino
ModelBissell ICONpet Cordless 2288 Nettest CMA-5000A TSI 8533EP 8533 8534 8530EP
Part NumberSkullcandy 512HCBATT LI202S-NT-4600 LI202S-NT-46A TSI LI202SX-6600
Specifications148.32 x 88.35 x 19.56
Battery Pack148.32 x 88.35 x 19.56
Battery Capacity5200 milliamp_hours
Battery Voltage14.4 volts

Questions about this item

How many charge cycles will the 5200 mAh lithium-ion pack sustain before runtime drops noticeably?

The manufacturer rates the cell chemistry for extended cycle life but does not publish a specific cycle-count figure; regular full charge and discharge cycles every few months help maintain capacity.

What temperature rise or fan noise should I expect when the battery powers a TSI 8533EP continuously for a full workday?

The pack itself has no moving parts and generates minimal heat during normal discharge; any warmth or noise comes from the host instrument, not the battery.

Which original part numbers must my TSI instrument already use for this replacement to fit and communicate correctly?

It replaces TSI part LI202SX-6600 and the variants LI202S-NT-4600 and LI202S-NT-46A, matching the decoded chip and connector of those packs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.