We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, matte finish, labelled 3800mAh 12V for Datex-Ohmeda S/5CAM

Cameron Sino 3800mAh 12V NiZn Battery for Datex-Ohmeda S/5 S5CAM

SKU CH-NEZC-19PSV

Nickel-zinc 3800mAh 12V replacement battery for Datex-Ohmeda S/5 patient monitors

  • Specifications133.50 x 84.50 x 19.00
  • Typenickel_zinc
  • Battery Pack133.50 x 84.50 x 19.00
  • Battery Typenickel_zinc
  • Battery Capacity3800.00 milliamp_hours
  • Battery Voltage12.00 volts
  • 3800mAh capacity powers patient monitors for extended shifts
  • 0V nickel-zinc chemistry matches original equipment specifications
  • Direct replacement for Datex-Ohmeda S/5 and S5CAM series monitors
  • Certified to ISO9001, RoHS and CE standards for medical use
  • Built-in protection against overcharge, over-discharge and short circuits

Compatible Replacement Battery

The Cameron Sino 3800mAh 12V NiZn battery replaces the original power pack in Datex-Ohmeda S/5, S/5CAM and S5 patient monitors. It delivers 3800mAh capacity at 12.00 volts with a fully decoded chip that mirrors OEM behaviour.

Verify Model And Part Number

Before ordering, confirm your monitor shows one of the listed model names and that the original battery carries part number 17014, 5010, B11221, 10HR4/3AU, AMED2002 or OM11221. The pack measures 133.50 x 84.50 x 19.00 mm and weighs 538.7 g, so the battery bay must accept those dimensions.

Drop-In Medical Power

The unit fits directly into the monitor’s existing compartment and connects with the original connector, requiring no extra cabling or adapters. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits, while ISO9001, RoHS and CE certification support clinical safety compliance.

Highlights

  • 3800mAh capacity powers patient monitors for extended shifts
  • 0V nickel-zinc chemistry matches original equipment specifications
  • Direct replacement for Datex-Ohmeda S/5 and S5CAM series monitors
  • Certified to ISO9001, RoHS and CE standards for medical use
  • Built-in protection against overcharge, over-discharge and short circuits

Specifications

BrandCameron Sino
ModelS/5 Patient Monitor
Part Number17014, 5010, B11221
Specifications133.50 x 84.50 x 19.00
Typenickel_zinc
Battery Pack133.50 x 84.50 x 19.00
Battery Typenickel_zinc
Battery Capacity3800.00 milliamp_hours
Battery Voltage12.00 volts

Questions about this item

What is included in the box and do I need to buy a charger separately?

The box contains one 12.0 V 3800 mAh nickel-zinc battery pack measuring 133.50 x 84.50 x 19.00 mm and weighing 538.7 g. The monitor's own charging circuit recharges the pack, so no separate charger is required.

Which part number should I match to be sure this battery fits my Datex-Ohmeda S/5CAM?

Match any of the original part numbers 17014, 17014-HEL, 5010, B11221, OM11221, 10HR4/3AU or AMED2002; this replacement is built to those exact specifications.

What does the 3800 mAh rating mean for actual run-time in an S/5 patient monitor?

At 12.0 V the pack stores 45.60 Wh; run-time depends on the monitor's power draw, but the fully decoded chip reports capacity accurately so the device's fuel gauge remains reliable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.