Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01001555BTC
In stock
Cameron Sino 3600mAh 7.4V Li-Po Battery for MVP-8400 FG5965-20
3600 mAh 7.4 V lithium-polymer replacement battery fits MVP-8400 and MVP-8400i touch panels, part FG5965-20
- Specifications217.22 x 40.45 x 12.25
- Typelithium_polymer
- Battery Pack217.22 x 40.45 x 12.25
- Battery Typelithium_polymer
- Battery Capacity3600.00 milliamp_hours
- Battery Voltage7.40 volts
- 3600 mAh capacity powers MVP-8400 touch panels for extended sessions
- 4 V lithium-polymer chemistry matches original equipment voltage
- 22 × 40.45 × 12.25 mm form factor fits the battery bay exactly
- ISO 9001, RoHS and CE certifications confirm regulated manufacturing standards
- Fully decoded chip communicates with the device like the factory battery
Replacement Battery for MVP Touch Panels
This 3600mAh lithium-polymer cell delivers 7.4 volts and 26.64Wh to compatible MVP-8400 and MVP-8400i Modero ViewPoint touch panels. It matches the original FG5965-20 part number and fits the 217.22 x 40.45 x 12.25mm battery bay. A built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits. The pack weighs 260.0g and arrives new with certified ISO9001, RoHS and CE compliance.
Upgrading from a Depleted Original Cell
When the factory battery no longer holds a full day’s charge or shows swelling, this direct replacement restores the rated runtime without firmware changes. The decoded chip communicates with the panel exactly like the original, so the battery gauge remains accurate after two or three conditioning cycles. Installation is straightforward for technicians familiar with the MVP chassis; connector alignment is the only critical step.
Suited for Integrators Maintaining MVP-8400 Fleets
This unit serves installers and facility managers who need a reliable spare for Modero ViewPoint touch panels in fixed indoor installations. It is not intended for mobile devices, high-vibration environments or applications requiring hot-swap capability. Buyers needing a different voltage, capacity or form factor should verify their device’s part number before ordering.
Highlights
- 3600 mAh capacity powers MVP-8400 touch panels for extended sessions
- 4 V lithium-polymer chemistry matches original equipment voltage
- 22 × 40.45 × 12.25 mm form factor fits the battery bay exactly
- ISO 9001, RoHS and CE certifications confirm regulated manufacturing standards
- Fully decoded chip communicates with the device like the factory battery
Specifications
| Brand | cameron sino |
|---|---|
| Model | Amazfit A1805 MVP-8400i MVP-8400 Modero ViewPoint Touch Panels MVP Touch Panels MVP-8400 Viewpoint Touch Panel |
| Part Number | Amazfit FG5965-20 MVP-BP |
| Specifications | 217.22 x 40.45 x 12.25 |
| Type | lithium_polymer |
| Battery Pack | 217.22 x 40.45 x 12.25 |
| Battery Type | lithium_polymer |
| Battery Capacity | 3600.00 milliamp_hours |
| Battery Voltage | 7.40 volts |
Questions about this item
Will the 217.22 x 40.45 x 12.25 mm pack fit inside the MVP-8400 housing?
The battery matches the original FG5965-20 dimensions of 217.22 x 40.45 x 12.25 mm and is listed as a direct replacement for the MVP-8400 and MVP-8400i touch panels.
What is the common mistake when connecting the replacement battery?
The supplier notes that the connector must be properly seated during installation; a loose or misaligned plug is the step most often missed.
How long before the 3600mAh 7.4V cell needs replacing?
A new lithium-polymer pack reaches peak capacity after 2 or 3 full charge cycles and should be replaced when runtime drops noticeably or the pack swells.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
