Cameron Sino 3500mAh 13.2V Battery for Fujikura BTR-08/FSM Series
Replacement battery delivers 3500mAh at 13.2V for Fujikura fusion splicers including BTR-08, FSM-17, FSM-18, FSM-50 and FSM-60 series
- Specifications100.86 x 68.40 x 32.14
- Battery Pack100.86 x 68.40 x 32.14
- Battery Capacity3500 milliamp_hours
- Battery Voltage13.2 volts
- Reliable power for Fujikura splicers with 3500mAh capacity
- 2V output matches original BTR-08 specifications exactly
- Certified ISO9001 RoHS CE for medical-grade safety standards
- Compact 100.86 x 68.40 x 32.14mm fits existing battery compartments
- Built-in protection guards against overcharge over-discharge short circuit
Replacement battery for Fujikura fusion splicers
This Cameron Sino battery replaces the original BTR-08 and FSM-series packs used in Fujikura fusion splicers. It delivers 3500mAh at 13.2V and fits models including the BTR-08, BTR-08R, FSM-17R, FSM-17S, FSM-18R, FSM-18S, FSM-50R, FSM-50S, FSM-60R, FSM-60S and Fusion Splicers P-0827. The pack is certified to ISO9001, RoHS and CE standards. It is not for users needing a different voltage or capacity than 13.2V and 3500mAh.
Thermal behaviour and power characteristics
The battery operates safely within a storage limit of 60 degrees Celsius or 140 degrees Fahrenheit. It incorporates overcharge, over-discharge, over-voltage and short-circuit protection circuits. The 46.20Wh energy rating supports extended field splicing sessions. No active cooling or fan is involved, so acoustic noise is absent. It is not for applications requiring hot-swap capability without a shutdown cycle.
Bundled protection and installation aids
The package includes shock-absorbing foam to protect the cells during transport. A fully decoded chip ensures the splicer recognises the pack immediately. The supplier notes that installation videos are available online and that performance stabilises after two or three full charge-discharge cycles. Using a low-quality third-party charger is discouraged as it can reduce service life. No software, cables or mounting hardware are supplied.
Highlights
- Reliable power for Fujikura splicers with 3500mAh capacity
- 2V output matches original BTR-08 specifications exactly
- Certified ISO9001 RoHS CE for medical-grade safety standards
- Compact 100.86 x 68.40 x 32.14mm fits existing battery compartments
- Built-in protection guards against overcharge over-discharge short circuit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | BTR-08, BTR-08R, FSM-17R, FSM-17S, FSM-18R, FSM-18S, FSM-50R, FSM-50S, FSM-60R, FSM-60S, Fusion Splicers P-0827 |
| Part Number | 11HR-4/3FAU, 11HR-4/3FAUP, 3200497-000, BTR-06L, BTR-06S, BTR-08 |
| Specifications | 100.86 x 68.40 x 32.14 |
| Battery Pack | 100.86 x 68.40 x 32.14 |
| Battery Capacity | 3500 milliamp_hours |
| Battery Voltage | 13.2 volts |
Questions about this item
How do I install the battery in my Fujikura FSM-60R splicer, and what connector step is often missed?
Slide the pack into the battery compartment until the 13.2 V connector clicks firmly into the socket; a loose fit prevents the splicer from recognising the 3500 mAh capacity.
What maintenance will this replacement pack need over its service life?
Run two or three full charge and discharge cycles when new, then recharge before storage; avoid chargers not rated for 13.2 V to preserve the protection circuit.
What is the first limit reached during continuous splicing with the 46.20 Wh pack?
The 3500 mAh capacity sets runtime; after roughly one full day of heavy use the voltage drops and the splicer shuts down until recharged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ENERGIZER
ENERGIZER AA Alkaline Battery 24 x 2 Pack (48 Total) 1.5V 10-Year Shelf Life
$67.99
0.00080949BTC
In stock