Cameron Sino 3400mAh 11.10V Li-ion Battery for Bose SoundLink 3 404600
Replacement lithium-ion battery delivering 3400mAh at 11.10V for compatible Bose SoundLink and SoundTouch speakers
- Specifications178.60 x 31.26 x 42.12
- Typelithium_ion
- Battery Pack178.60 x 31.26 x 42.12
- Battery Typelithium_ion
- Battery Capacity3400.00 milliamp_hours
- Battery Voltage11.10 volts
- 3400 mAh capacity powers the speaker for longer listening sessions
- 10 V lithium-ion chemistry matches the original power specification
- Compatible with Bose SoundLink 3, SoundLink 2 and SoundTouch 20 models
- Decoded chip communicates with the speaker just like the factory battery
- 60 × 31.26 × 42.12 mm dimensions fit the original battery compartment
Direct Replacement Battery
This 3400mAh 11.10V lithium-ion pack replaces the original cell in Bose SoundLink 3, SoundLink 2, SoundLink II and SoundTouch 20 speakers. It matches the 178.60 x 31.26 x 42.12mm form factor and 175.6g weight so the battery compartment closes without modification. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short circuits.
Upgrade From Degraded Original
The jump is worth it when the factory battery no longer holds a full day of playback or the speaker shuts down at moderate volume. A fresh 37.74Wh cell restores the runtime the system was designed for and the decoded chip reports capacity accurately to the speaker firmware. Installation videos are widely available and the process needs only basic hand tools.
Verify Model And Connector
Before ordering, confirm the speaker model number and the original battery part number against the supported list: 330105, 330105A, 330107, 330107A, 359495, 359498, 404600 or 404900. Ensure the connector on the replacement aligns with the socket in your unit. The pack ships with protective foam for transit and reaches peak capacity after two or three full charge cycles.
Highlights
- 3400 mAh capacity powers the speaker for longer listening sessions
- 10 V lithium-ion chemistry matches the original power specification
- Compatible with Bose SoundLink 3, SoundLink 2 and SoundTouch 20 models
- Decoded chip communicates with the speaker just like the factory battery
- 60 × 31.26 × 42.12 mm dimensions fit the original battery compartment
Specifications
| Brand | cameron sino |
|---|---|
| Model | Wiper i130S SoundLink 3 404600 SoundTouch 20 Soundlink 2 Soundlink II |
| Part Number | Wiper 330107 359495 359498 330105 330105A 330107A 404600 404900 |
| Specifications | 178.60 x 31.26 x 42.12 |
| Type | lithium_ion |
| Battery Pack | 178.60 x 31.26 x 42.12 |
| Battery Type | lithium_ion |
| Battery Capacity | 3400.00 milliamp_hours |
| Battery Voltage | 11.10 volts |
Questions about this item
What are the exact dimensions of this 178.60 x 31.26 x 42.12 mm battery for the Bose SoundLink 3?
The pack measures 178.60 mm long, 31.26 mm wide and 42.12 mm high, matching the original 404600 form factor.
How is the replacement battery installed and which step is most often missed?
Disconnect the old pack, align the multi-pin connector, press it firmly until it clicks, then secure the battery tray screws.
After how many charge cycles does the 3400 mAh lithium-ion cell reach full capacity?
The manufacturer states the new cell achieves its best performance after 2 or 3 complete charge and discharge cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



