We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark plastic casing, labelled 3400mAh 10.8V

Cameron Sino 3400mAh 10.8V Battery for Bissell 3061+ 3190+ 3191+ PowerLifter Adapt IonVacuum P2

SKU CH-JH4B-D6XKB

Replacement lithium-ion battery rated 3400 mAh at 10.8 V for compatible Bissell PowerLifter Adapt IonVacuum models

  • Specifications66.80 x 57.90 x 20.30
  • Typelithium_ion
  • Battery Pack66.80 x 57.90 x 20.30
  • Battery Typelithium_ion
  • Battery Capacity3400 milliamp_hours
  • Battery Voltage10.8 volts_of_alternating_current
  • Compatible with Bissell 3061+, 3190+, 3191+, PowerLifter Adapt IonVacuum P2
  • 3400mAh capacity delivers 36.72Wh runtime for extended cleaning sessions
  • 8V lithium-ion chemistry matches original battery voltage exactly
  • Compact 66.80 x 57.90 x 20.30mm form factor fits original battery compartment
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuit

Compatible Models

This replacement battery fits Bissell 3061+, 3190+, 3191+, PowerLifter Adapt IonVacuum and PowerLifter Adapt IonVacuum P2 cleaners. It matches original part numbers 1627238 and 1627640 for direct substitution. A new fully decoded chip ensures the pack communicates correctly with the vacuum electronics.

Sustained Runtime

The lithium-ion pack delivers 3400mAh at 10.8V for 36.72Wh of energy capacity. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits during extended cleaning sessions. Performance stabilises after two or three full charge and discharge cycles.

Critical Specification

The physical dimensions are 66.80 x 57.90 x 20.30mm and the pack weighs 160.0g. Buyers must verify their original battery matches these measurements and the listed part numbers before ordering. Units that differ in size or connector layout will not install correctly.

Highlights

  • Compatible with Bissell 3061+, 3190+, 3191+, PowerLifter Adapt IonVacuum P2
  • 3400mAh capacity delivers 36.72Wh runtime for extended cleaning sessions
  • 8V lithium-ion chemistry matches original battery voltage exactly
  • Compact 66.80 x 57.90 x 20.30mm form factor fits original battery compartment
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuit

Specifications

Brandcameron sino
Model3061+, 3190+, 3191+, PowerLifter Adapt IonVacuum, PowerLifter Adapt IonVacuum P2
Part Number1627238, 1627640
Specifications66.80 x 57.90 x 20.30
Typelithium_ion
Battery Pack66.80 x 57.90 x 20.30
Battery Typelithium_ion
Battery Capacity3400 milliamp_hours
Battery Voltage10.8 volts_of_alternating_current

Questions about this item

Does the 3400 mAh 10.8 V lithium-ion pack run hot during a full day of vacuuming?

The battery is rated at 36.72 Wh and 160.0 g; normal operation stays within the 60 °C storage limit, so extended cleaning sessions do not cause excessive heat.

Must I already own a Bissell 3061+, 3190+ or 3191+ PowerLifter Adapt IonVacuum P2 for this pack to fit?

Yes — the replacement is built to the exact 66.80 × 57.90 × 20.30 mm dimensions and decoded chip for part numbers 1627238 and 1627640, so it only works in those models.

Will the new 3400 mAh cell work alongside the original charger that came with my older PowerLifter Adapt?

The pack includes over-charge, over-discharge and short-circuit protection tuned for the factory charger; using the original adapter maintains the designed charge profile and battery life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.