Cameron Sino 300mAh 3.7V Battery for ET-400/402 EZ-900/902/903/904 ME-300 PE-900/902/903 RX-090
Replacement lithium-polymer battery for compatible Educator dog-collar receivers and transmitters, 300mAh at 3.7V with built-in protection circuits
- Specifications30.20 x 18.24 x 7.20
- Typelithium_polymer
- Battery Pack30.20 x 18.24 x 7.20
- Battery Typelithium_polymer
- Battery Capacity300.00 milliamp_hours
- Battery Voltage3.70 volts
- Ready replacement for Educator ET and EZ series collars
- 300 mAh lithium-polymer cell delivers 1.11 Wh capacity
- Compact 30.20 × 18.24 × 7.20 mm size fits original compartment
- Built-in protection guards against overcharge, over-discharge and short circuits
- ISO 9001, RoHS and CE certified for safety compliance
Compatible Dog Collar Battery
This 300mAh 3.7V lithium polymer cell replaces the original power source for Educator ET-400, ET-402, EZ-900, EZ-902, EZ-903, EZ-904, ME-300, PE-900, PE-902, PE-903 and RX-090 receiver or transmitter collars. It matches the factory dimensions of 30.20 x 18.24 x 7.20mm and weighs 6.5g. A built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits.
Suits Owners Needing Direct Replacement
The pack fits the listed Educator models using part numbers BL-100, BP37TR, BP-504, PL-711828 or PL-711828N. Buyers whose collar uses a different voltage, capacity or connector should look elsewhere. The cell is not intended for devices outside the specified compatibility list.
Ready-to-Install Pack with Protective Foam
Each unit ships as a single battery wrapped in shock-absorbing foam for transit protection. No charger, tools or additional accessories are included. Installation videos are available online for reference. The battery reaches optimal performance after two or three full charge cycles.
Highlights
- Ready replacement for Educator ET and EZ series collars
- 300 mAh lithium-polymer cell delivers 1.11 Wh capacity
- Compact 30.20 × 18.24 × 7.20 mm size fits original compartment
- Built-in protection guards against overcharge, over-discharge and short circuits
- ISO 9001, RoHS and CE certified for safety compliance
Specifications
| Brand | cameron sino |
|---|---|
| Model | Educator ET-300Receiver ET-302Receiver ET-300-LReceiver ET-302-LReceiver ET-400Receiver ET-402Receiver EZ-900Receiver EZ-902Receiver EZ-903Receiver EZ-904Receiver |
| Specifications | 30.20 x 18.24 x 7.20 |
| Type | lithium_polymer |
| Battery Pack | 30.20 x 18.24 x 7.20 |
| Battery Type | lithium_polymer |
| Battery Capacity | 300.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
Which Educator or Dogtra collar models accept this 30.20 x 18.24 x 7.20 mm lithium-polymer cell?
It replaces the original pack in Educator ET-300, ET-302, ET-400, ET-402 and EZ-900 through EZ-904 receivers, plus ME-300 transmitter and PE-900, PE-902, PE-903, RX-090 dog-collar units.
Will the original charger for my ET-400 or EZ-902 receiver charge this 3.7 V 300 mAh pack correctly?
Yes — the built-in decoded chip matches the factory voltage and capacity, so the stock charger delivers the same 3.7 V charge cycle without modification.
How can I confirm the battery is holding its rated 1.11 Wh after the first few charge cycles?
After two or three full charge-and-discharge cycles the collar should run its normal operating time; a sudden drop in run-time signals the pack is not performing to spec.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



