Cameron Sino 2600mAh 7.4V Li-ion Battery for Cavotec M9-1051-3600 EX MC-3 MC-3000
Replacement lithium-ion battery delivers 2600 mAh at 7.4 V for Cavotec M9-1051-3600 EX, MC-3 and MC-3000 crane remote controls
- Specifications93.70 x 41.50 x 27.50
- Typelithium_ion
- Battery Pack93.70 x 41.50 x 27.50
- Battery Typelithium_ion
- Battery Capacity2600.00 milliamp_hours
- Battery Voltage7.40 volts
- 2600 mAh capacity powers crane remotes longer
- 4 V lithium-ion chemistry matches original specs
- 70 × 41.50 × 27.50 mm form factor fits MC-3 and MC-3000 units
- ISO 9001 RoHS CE certified for safe operation
- Fully decoded chip enables plug-and-play installation
Replacement Battery for Cavotec Crane Remotes
This 7.4 V lithium-ion pack replaces the original Cavotec M9-1051-3600 EX, MC-3 and MC-3000 remote-control batteries. It delivers 2600 mAh capacity and 19.24 Wh energy in the same 93.70 x 41.50 x 27.50 mm form factor. The integrated decoded chip communicates with the handset exactly like the factory unit. Installers can follow widely available online guides for a straightforward swap.
Single-Cell Voltage and Physical Envelope
The pack operates at a nominal 7.4 V, so it only suits devices designed for that exact voltage; higher or lower systems will not function correctly. Its rigid casing measures 93.70 x 41.50 x 27.50 mm, meaning the remote's battery compartment must match those dimensions precisely. No adapter plates or wiring harnesses are included, so the original connector must align with the replacement's terminals.
2600 mAh Capacity Decides Runtime
Capacity of 2600 mAh determines how long the crane remote runs between charges; operators needing longer shifts must verify this figure meets their duty-cycle requirements. The battery weighs 118.2 g, a detail that matters only if the handset has a strict mass limit. Buyers whose equipment demands a different amp-hour rating or a different voltage should not order this part.
Highlights
- 2600 mAh capacity powers crane remotes longer
- 4 V lithium-ion chemistry matches original specs
- 70 × 41.50 × 27.50 mm form factor fits MC-3 and MC-3000 units
- ISO 9001 RoHS CE certified for safe operation
- Fully decoded chip enables plug-and-play installation
Specifications
| Brand | cameron sino |
|---|---|
| Model | Replacement battery |
| Part Number | Amazfit A1805 MC-3 MC-3000 |
| Specifications | 93.70 x 41.50 x 27.50 |
| Type | lithium_ion |
| Battery Pack | 93.70 x 41.50 x 27.50 |
| Battery Type | lithium_ion |
| Battery Capacity | 2600.00 milliamp_hours |
| Battery Voltage | 7.40 volts |
Questions about this item
Should I choose the 2600mAh 7.4V version or a different capacity for my Cavotec MC-3 remote?
The 2600mAh 7.4V battery matches the original Cavotec M5-1051-3600 specification for the MC-3 and MC-3000 remotes. Using the specified voltage and capacity ensures correct runtime and safe operation.
What does the 19.24Wh rating mean for actual remote control runtime?
19.24Wh is the total energy the pack stores. A Cavotec crane remote typically draws a few watts, so this capacity provides several hours of continuous use before recharging is needed.
Does the battery use a standard connector or a proprietary Cavotec interface?
The replacement includes a fully decoded chip and connector that matches the original Cavotec M5-1051-3600 pack, allowing direct installation in the MC-3 and MC-3000 remotes without adapter cables.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



