Cameron Sino 2600mAh 7.4V Battery J406/ICR18650NH-2S for BeoLit 15, 17, BeoPlay A2, A2 Active
A 2600 mAh 7.4 V lithium-ion replacement battery for BeoLit 15, BeoLit 17, BeoPlay A2 and BeoPlay A2 Active speakers
- Specifications132.05 x 22.20 x 18.50
- Typelithium_ion
- Battery Pack132.05 x 22.20 x 18.50
- Battery Typelithium_ion
- Battery Capacity2600 milliamp_hours
- Battery Voltage7.4 volts
- Replaces original battery in BeoLit 15, 17 and BeoPlay A2 models
- 2600 mAh capacity at 7.4 V delivers 19.24 Wh of energy
- Slim 132.05 x 22.20 x 18.50 mm form factor fits speaker cavity
- Built-in protection guards against overcharge, over-discharge and short circuits
- Fully decoded chip works like the original battery
Compatible Speaker Models
This Cameron Sino battery replaces the original power pack in Bang & Olufsen BeoLit 15, BeoLit 17, BeoPlay A2 and BeoPlay A2 Active speakers. It delivers a 2600mAh capacity at 7.4 volts with a fully decoded chip that communicates with the speaker electronics. The lithium-ion cell measures 132.05 x 22.20 x 18.50 millimetres and weighs 96.5 grams.
Verify Before Ordering
Confirm that your speaker carries one of the four model names listed above and that the original battery bears part number J406/ICR18650NH-2S. Check that the existing pack dimensions match 132.05 x 22.20 x 18.50 millimetres so the replacement fits the compartment. Ensure the connector orientation aligns with the socket before completing the installation.
Replaces Worn Original Pack
This unit restores runtime when the factory-fitted battery no longer holds a useful charge after repeated cycles. The upgrade is worthwhile when playback time has dropped noticeably or the speaker shuts down unexpectedly under load. It is not suitable for speakers outside the four listed models or for devices requiring a different voltage or form factor.
Highlights
- Replaces original battery in BeoLit 15, 17 and BeoPlay A2 models
- 2600 mAh capacity at 7.4 V delivers 19.24 Wh of energy
- Slim 132.05 x 22.20 x 18.50 mm form factor fits speaker cavity
- Built-in protection guards against overcharge, over-discharge and short circuits
- Fully decoded chip works like the original battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | BeoLit 15, BeoLit 17, BeoPlay A2, BeoPlay A2 Active |
| Part Number | J406/ICR18650NH-2S |
| Specifications | 132.05 x 22.20 x 18.50 |
| Type | lithium_ion |
| Battery Pack | 132.05 x 22.20 x 18.50 |
| Battery Type | lithium_ion |
| Battery Capacity | 2600 milliamp_hours |
| Battery Voltage | 7.4 volts |
Questions about this item
What comes in the box and do I need any extra tools to fit the 132.05 x 22.20 x 18.50 mm pack?
The pack ships with shock-absorbing foam for transit protection; no tools are mentioned, so check your speaker's service guide for any required screwdrivers or opening picks.
How do I confirm the J406/ICR18650NH-2S part number matches my BeoLit 15, 17 or BeoPlay A2 Active?
Compare the 7.4 V, 2600 mAh, 19.24 Wh rating and the 132.05 x 22.20 x 18.50 mm dimensions on your original battery label with the figures listed for this replacement.
What does the 19.24 Wh rating mean for actual play time on a BeoPlay A2?
At the nominal 3.7 V per cell the pack stores 19.24 Wh; real-world run time depends on the speaker's volume level and power draw, so expect less than the theoretical maximum.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



