Cameron Sino 2600mAh 14.4V dry cell battery for Ecovacs Deebot Ozmo 900/901/905/920/930/937
Replacement 2600mAh 14.4V dry cell battery compatible with multiple Ecovacs Deebot Ozmo models
- Capacity (mAh)2600mAh / 37.44Wh
- Longer cleaning sessions with 2600mAh 37.44Wh capacity
- Reliable power at 14.4V matching original spec
- Fits Ozmo 900 901 905 920 930 937 models
- ISO9001 RoHS CE certified for safety
- Ready-to-install design with decoded chip included
Replacement battery for Ecovacs Deebot Ozmo series
This 14.4 V dry-cell battery replaces the original pack in Ecovacs Deebot Ozmo 900, 901, 905, 920, 930 and 937 robot vacuums. It delivers a rated capacity of 2600 mAh (37.44 Wh) and uses a fully decoded chip that communicates with the vacuum exactly like the factory unit. Owners of compatible DG and DN series models can also use it when the part number matches S01-LI-148-2600.
Slim pack with original mounting points
The cell measures 133.10 x 37.20 x 20.40 mm and weighs 202.4 g, matching the OEM footprint so it seats in the battery bay without adapters or cable rerouting. Installation follows the same latch mechanism as the stock battery; many users complete the swap in minutes by following publicly available video guides. ISO 9001, RoHS and CE certifications confirm the build meets recognised safety and environmental standards.
Protected chemistry for steady runtime
Integrated circuitry guards against overcharge, over-discharge, over-voltage and short-circuit events, helping the pack maintain consistent output through daily cleaning cycles. The lithium-ion chemistry sustains the nominal 14.4 V under load, so suction power does not sag as the charge depletes. No active cooling is required; the vacuum’s existing airflow keeps the pack within normal operating temperatures during typical use.
Highlights
- Longer cleaning sessions with 2600mAh 37.44Wh capacity
- Reliable power at 14.4V matching original spec
- Fits Ozmo 900 901 905 920 930 937 models
- ISO9001 RoHS CE certified for safety
- Ready-to-install design with decoded chip included
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Deebot DG31, Deebot DG36, Deebot DG70, Deebot DN56, Deebot DN58, Deebot DV33, Deebot DV35, Deebot DV37, Deebot DV66, Deebot N5, Deebot N5 GO, Deebot N5 HERO, Deebot N5 POWER, Deebot N8, Deebot N8 Pro, Deebot N8 Pro+, Deebot Ozmo 900, Deebot Ozmo 901, Deebot Ozmo 905, Deebot Ozmo 920, Deebot Ozmo 930, Deebot Ozmo 937, DG36, DG3G, DG70, DX32, DX33, DX55, N5 Fun, N5 Go, N5 Hero, N5 Neo, N5 Power, N8, N8 Pro, N8 Pro+, O900, OSLIM10, OSLIM11, T5 Fun, T5 Hero, T5 Max, T5 Neo, T5 Plus, T5 Power |
| Capacity (mAh) | 2600mAh / 37.44Wh |
Questions about this item
What voltage does the 14.4V 2600mAh pack deliver to the Deebot Ozmo 900 series?
The pack supplies 14.4V, matching the original S01-LI-148-2600 specification for Ozmo 900, 901, 905, 920, 930 and 937 models.
Will the 133.10 x 37.20 x 20.40mm case fit the battery bay on a Deebot DG36 or DN58?
Yes, the dimensions are identical to the OEM pack used in DG36, DG70, DN56, DN58, DV33, DV35, DV37 and DV66 chassis.
Which step do owners often miss when swapping the S01-LI-148-2600 cell?
Many forget to reconnect the decoded chip ribbon before sealing the cover, so the robot cannot recognise the new pack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ENERGIZER
ENERGIZER AA Alkaline Battery 24 x 2 Pack (48 Total) 1.5V 10-Year Shelf Life
$67.99
0.00081781BTC
In stock