Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00998522BTC
In stock
Cameron Sino 2400mAh 7.4V Li-Po Battery for ABUS Secvest FUBT50000
Replacement lithium-polymer battery for ABUS Secvest wireless alarm systems, 2400 mAh at 7.4 V with built-in protection circuits
- Specifications61.50 x 36.20 x 18.50
- Typelithium_polymer
- Battery Pack61.50 x 36.20 x 18.50
- Battery Typelithium_polymer
- Battery Capacity2400.00 milliamp_hours
- Battery Voltage7.40 volts
- Reliable power for Secvest systems with 2400 mAh capacity
- Exact fit for ABUS FUBT50000 part number
- Certified safety through ISO 9001, RoHS and CE standards
- Compact lithium-polymer pack measuring 61.50 x 36.20 x 18.50 mm
- Built-in protection against overcharge, over-discharge and short circuit
Replacement battery for ABUS Secvest
This lithium-polymer pack replaces the original ABUS FUBT50000 battery in Secvest wireless alarm panels. It supplies 7.4 V and 2400 mAh capacity with a fully decoded chip that communicates with the host system. Installers and homeowners use it to restore standby power after the factory cell degrades.
Upgrading from a depleted original cell
The swap is worthwhile when the panel reports low-battery faults or the siren fails to sound during test cycles. A fresh pack restores the rated 17.76 Wh reserve so the system meets its certified backup-time requirement. It is not for installations that demand a higher capacity than 2400 mAh or a different voltage rail.
Limits of the lithium-polymer chemistry
The pack must not be stored above 60 °C or 140 °F and must never be disassembled, immersed or exposed to fire. Over-charge, over-discharge, over-voltage and short-circuit protection circuits are built in, yet the chemistry still ages with calendar time. Users who need indefinite shelf life or extreme-temperature operation should choose a different technology.
Highlights
- Reliable power for Secvest systems with 2400 mAh capacity
- Exact fit for ABUS FUBT50000 part number
- Certified safety through ISO 9001, RoHS and CE standards
- Compact lithium-polymer pack measuring 61.50 x 36.20 x 18.50 mm
- Built-in protection against overcharge, over-discharge and short circuit
Specifications
| Brand | cameron sino |
|---|---|
| Model | Abus Secvest FUAA50000 FUAA50100 FUAA50500 FUAA50600 Secvest Wireless Alarm System FUAA50010 |
| Part Number | ABUS FUBT50000 |
| Specifications | 61.50 x 36.20 x 18.50 |
| Type | lithium_polymer |
| Battery Pack | 61.50 x 36.20 x 18.50 |
| Battery Type | lithium_polymer |
| Battery Capacity | 2400.00 milliamp_hours |
| Battery Voltage | 7.40 volts |
Questions about this item
What are the exact dimensions of this 61.50 x 36.20 x 18.50 mm battery for the Secvest panel?
The pack measures 61.50 mm long, 36.20 mm wide and 18.50 mm thick, matching the original ABUS FUBT50000 footprint.
How do I install the replacement and which step is most often missed?
Open the Secvest housing, unplug the old pack, connect the new battery's decoded chip connector firmly until it clicks, then close the cover; the step most often missed is fully seating the connector.
When will this 2400 mAh lithium-polymer pack need replacing again?
Expect several years of standby service; replace when the panel reports low capacity or after the pack no longer holds a full charge through a power cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
