Cameron Sino 2200mAh 7.2V Battery for Tait TP8100/TP8110/TP8140/TP9300/TP9400
Replacement lithium-ion battery delivering 2200 mAh at 7.2 V for Tait TP8100, TP8110, TP8140, TP9300 and TP9400 radios
- Specifications85.70 x 47.90 x 69.62
- Battery Pack85.70 x 47.90 x 69.62
- Battery Capacity2200.00 milliamp_hours
- Battery Voltage7.20 volts
- 2200 mAh capacity extends radio talk time
- 2 V output matches original Tait specifications
- Compatible with TP8100, TP8110, TP8140, TP9300, TP9400 models
- Replaces OEM part numbers T03-00011-CAAA, TPA-BA-100, TPK-BA-100, TPK-BA-101, TT35L1-D
- Built-in protection against overcharge, over-discharge and short circuit
Compatible Tait radios
This 2200 mAh lithium-ion pack replaces the original T03-00011-CAAA, TPA-BA-100, TPK-BA-100, TPK-BA-101 and TT35L1-D cells. It fits the TP8100, TP8110, TP8115, TP8120, TP8135, TP8140, TP9300 and TP9400 two-way radios. The fully decoded chip communicates with the handset exactly like the factory unit.
Thermals, noise and power draw
As a battery it produces no audible noise and draws no power while idle in the radio. Normal operation stays within the 7.2 V nominal voltage and 15.84 Wh energy rating. The built-in protection circuit guards against over-charge, over-discharge, over-voltage and short-circuit events during daily use.
Sustained load behaviour
After two or three full charge-discharge cycles the pack reaches its rated 2200 mAh capacity. Continuous transmission draws current steadily until the protection circuit cuts off at the safe lower voltage limit. The 223.6 g cell maintains output without thermal shutdown in typical duty cycles.
Not for users needing higher capacity
Operators who require longer shift runtimes between charges cannot be served by this 2200 mAh unit. Teams needing hot-swap packs with different form factors or voltage rails will find this model incompatible.
Highlights
- 2200 mAh capacity extends radio talk time
- 2 V output matches original Tait specifications
- Compatible with TP8100, TP8110, TP8140, TP9300, TP9400 models
- Replaces OEM part numbers T03-00011-CAAA, TPA-BA-100, TPK-BA-100, TPK-BA-101, TT35L1-D
- Built-in protection against overcharge, over-discharge and short circuit
Specifications
| Brand | FYIOGXG |
|---|---|
| Part Number | 4894128144144 |
| Specifications | 85.70 x 47.90 x 69.62 |
| Battery Pack | 85.70 x 47.90 x 69.62 |
| Battery Capacity | 2200.00 milliamp_hours |
| Battery Voltage | 7.20 volts |
Questions about this item
How do I install this 2200mAh 7.2V battery into my Tait TP8100, and what is the step people often miss?
Slide the pack into the radio chassis until the latches click, then verify the connector is fully seated; the supplier notes that an improperly connected connector is the most common oversight.
What maintenance will this lithium-ion 2200mAh pack need later?
No scheduled maintenance is required; the supplier advises 2 to 3 full charge and discharge cycles when new to reach best performance and to avoid low-quality third-party chargers that shorten lifespan.
What limit appears first during sustained use of this 7.2V 2200mAh battery?
The integrated protection circuit will cut output if overcharge, over-discharge, over-voltage or short-circuit conditions are detected, preventing damage before thermal limits are reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



