Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01001736BTC
In stock
Cameron Sino 2200mAh 10.8V Li-ion Battery for Cisco DPQ3212 DPQ3925
Replacement lithium-ion battery for Cisco DPQ3212 and DPQ3925 cable modems, 2200 mAh at 10.8 V
- Specifications83.28 x 61.00 x 21.00
- Typelithium_ion
- Battery Pack83.28 x 61.00 x 21.00
- Battery Typelithium_ion
- Battery Capacity2200.00 milliamp_hours
- Battery Voltage10.80 volts
- 2200 mAh capacity keeps your cable modem running during power cuts
- 8 V lithium-ion pack matches the original Cisco DPQ3212 and DPQ3925 specifications
- ISO 9001, RoHS and CE certified for safety and quality assurance
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Fully decoded chip works like the original battery for straightforward installation
Replacement Battery for Cisco DPQ3212 and DPQ3925
This 10.8V lithium-ion pack replaces the original battery in Cisco DPQ3212 and DPQ3925 cable modems. It delivers 2200mAh capacity and 23.76Wh energy rating. The pack measures 83.28 x 61.00 x 21.00mm and weighs 160.0g. A fully decoded chip ensures it works like the original unit.
Suitable for users restoring backup power
Buyers who need a different voltage or capacity should look elsewhere. This battery is not for devices outside the DPQ3212 and DPQ3925 compatibility list. It does not suit modems requiring alternative part numbers or form factors. Installers uncomfortable with internal hardware replacement should seek professional help.
Verify the modem model
Check that your device lists part numbers 4033435, FLK644A, PB013 or SMPCM1. Confirm the battery compartment accepts the 83.28 x 61.00 x 21.00mm dimensions. Ensure the connector matches the original orientation. Allow 2 to 3 full charge cycles for optimal performance.
Highlights
- 2200 mAh capacity keeps your cable modem running during power cuts
- 8 V lithium-ion pack matches the original Cisco DPQ3212 and DPQ3925 specifications
- ISO 9001, RoHS and CE certified for safety and quality assurance
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Fully decoded chip works like the original battery for straightforward installation
Specifications
| Brand | cameron sino |
|---|---|
| Model | Cisco DPQ3925 DPQ3212 NETGEAR Nighthawk AC1900 |
| Part Number | FOXLINK FLK644A Cisco PB013 4033435 SMPCM1 |
| Specifications | 83.28 x 61.00 x 21.00 |
| Type | lithium_ion |
| Battery Pack | 83.28 x 61.00 x 21.00 |
| Battery Type | lithium_ion |
| Battery Capacity | 2200.00 milliamp_hours |
| Battery Voltage | 10.80 volts |
Questions about this item
Which Cisco cable-modem models accept this 2200 mAh 10.8 V pack?
It is built for the DPQ3212 and DPQ3925 modems and matches part numbers 4033435, FLK644A, PB013 and SMPCM1.
Will the pack fit in the same bay as the original battery?
Yes, dimensions are 83.28 x 61.00 x 21.00 mm and weight is 160.0 g, matching the factory unit.
How can I confirm the battery is operating correctly after installation?
The modem should power up on battery alone, hold charge through several outages, and the on-board chip will report normal capacity after two to three full cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
