Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.0099484BTC
In stock
Cameron Sino 2000mAh 9.6V NiZn Battery 3303 8200 AD700 PN 120221
Nickel-zinc replacement battery for Capnocheck pulse oximeters and CO₂ monitors, 2000 mAh at 9.6 V
- Specifications56.60 x 49.70 x 28.60
- Typenickel_zinc
- Battery Pack56.60 x 49.70 x 28.60
- Battery Typenickel_zinc
- Battery Capacity2000.00 milliamp_hours
- Battery Voltage9.60 volts
- 2000 mAh NiZn chemistry powers compatible Capnocheck and pulse-oximeter models
- 6 V output matches original specifications for 3303, 8200 and AD700 devices
- ISO 9001 certified production with overcharge, over-discharge and short-circuit protection
- 6 × 49.7 × 28.6 mm form factor fits listed part numbers including 120221 and OM11094
- Supplied new with decoded chip for direct replacement in medical monitoring equipment
Compatible Medical Devices
This nickel-zinc battery fits the Capnocheck 3303, 8200 and AD700 pulse oximeters as well as the Capnocheck CO2 and SPO2 monitors. It replaces original part numbers including 120221, AAPLQBC1108, BATT/110221-K and OM11094. The pack delivers 9.6 volts and 2000mAh capacity for portable clinical use. Buyers needing a different voltage or chemistry cannot use this cell.
Sustained Discharge Behaviour
The 19.20Wh pack is built to the same specifications as the original battery and includes overcharge, over-discharge, over-voltage and short-circuit protection. A new fully decoded chip communicates with the host device exactly like the factory unit. Capacity reaches its best level after two or three full charge and discharge cycles. Users who require hot-swap capability or redundant power will not find that feature here.
Installation And Common Issues
The battery measures 56.60 by 49.70 by 28.60 millimetres and weighs 212.0 grams, matching the OEM form factor for a direct fit. Installation videos are widely available online and the process is straightforward when the connector is seated correctly. Using a low-quality third-party charger shortens service life and should be avoided. Do not disassemble, expose to fire or water, or store above 60 degrees Celsius (140 degrees Fahrenheit). Technicians needing field-replaceable modules without tools will find the design unsuitable.
Highlights
- 2000 mAh NiZn chemistry powers compatible Capnocheck and pulse-oximeter models
- 6 V output matches original specifications for 3303, 8200 and AD700 devices
- ISO 9001 certified production with overcharge, over-discharge and short-circuit protection
- 6 × 49.7 × 28.6 mm form factor fits listed part numbers including 120221 and OM11094
- Supplied new with decoded chip for direct replacement in medical monitoring equipment
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | 3303, 8200, AD-3000, AD-3000 Pulse Oximeter, AD700, AD-700, BCI Capnocheck, CapnoCheck, Sscor Inc AD-700 |
| Part Number | 5903, 9714, AAPLQBC1108, B11045, B11094, OM11094 |
| Specifications | 56.60 x 49.70 x 28.60 |
| Type | nickel_zinc |
| Battery Pack | 56.60 x 49.70 x 28.60 |
| Battery Type | nickel_zinc |
| Battery Capacity | 2000.00 milliamp_hours |
| Battery Voltage | 9.60 volts |
Questions about this item
How much heat can the NiZn 9.6 V pack tolerate during continuous use in a Capnocheck 3303?
The battery is rated for storage up to 60 °C (140 °F); operating beyond that temperature range will shorten its service life.
Which original part numbers must match for this 2000 mAh replacement to fit my device?
Verify that your device uses part number 120221, AAPLQBC1108, BATT/110221-K or OM11094 before ordering.
Will the 56.60 × 49.70 × 28.60 mm form factor slide into the battery compartment of a legacy Capnocheck 8200 (9714) unit?
Yes — the dimensions and 9.6 V 2000 mAh specification match the original pack used in the 8200 (9714) model.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
