Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.0098938BTC
In stock
Cameron Sino 2000mAh 6.0V Nickel-Zinc Battery for Liebherr Funkst FUB10XL
Nickel-zinc 6.0 V 2000 mAh replacement pack for Liebherr Funkst FUB10XL crane remotes
- Specifications153.40 x 56.20 x 19.55
- Typenickel_zinc
- Battery Pack153.40 x 56.20 x 19.55
- Battery Typenickel_zinc
- Battery Capacity2000.00 milliamp_hours
- Battery Voltage6.00 volts
- 2000 mAh capacity powers crane remotes longer
- 0 V nickel-zinc chemistry matches original specs
- 40 x 56.20 x 19.55 mm fits FUB10XL housing
- ISO9001 RoHS CE certified for safe operation
- Fully decoded chip works like the original battery
Replacement Battery for Liebherr Funkst Remotes
This 6.0V nickel-zinc pack delivers 2000mAh and 12.00Wh for Liebherr Funkst crane remote controls including the FUB10XL, FUB10AA and FUB78AA models. It matches the original BA14061 and PM471560 specifications with a fully decoded chip. The unit measures 153.40 x 56.20 x 19.55mm and weighs 318.0g.
Sustained Output with Protection Circuitry
The nickel-zinc chemistry maintains a stable 6.00V through the discharge curve rather than dropping sharply under load. Integrated safeguards guard against overcharge, over-discharge, over-voltage and short circuits during long operating shifts. A new cell reaches its best capacity after two or three complete charge cycles.
Verify Model and Connector Before Ordering
Confirm the remote shows FUB10XL, FUB10AA, FUB78AA or one of the listed part numbers such as BA14061, BA214060 or PM471560 on the original battery label. Ensure the connector layout matches the pack you are replacing. Do not use low-quality third-party chargers as they can reduce service life.
Highlights
- 2000 mAh capacity powers crane remotes longer
- 0 V nickel-zinc chemistry matches original specs
- 40 x 56.20 x 19.55 mm fits FUB10XL housing
- ISO9001 RoHS CE certified for safe operation
- Fully decoded chip works like the original battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | BA14061, FBFUB09N, FUB 9NM 6V, Fub06 Eex, FUB10AA, FUB10XL, FUB78AA, FUB9NM, Linus 4, Linus 6, Micron 4, Micron 6, PM471560, Radiomatic BA210040, Radiomatic BA211060, Radiomatic BA213020, Radiomatic BA214060, Radiomatic BA214061, Radiomatic Eco, Radiomatic FUB10XL, Radiomatic FUB78AA, Radiomatic PM458017, Radiomatic PM471560, Radiomatic Spectrum 2, Radiomatic Spectrum 3, Remote Control Crane Truck Dri, Spectrum 1, Spectrum 2, Spectrum 3, Spectrum A, Spectrum B, Technos |
| Part Number | 005-01-00466, BA209000, BA209001, BA209060, BA209061, BA209062, BA210, BA213020, BA213030, BA214060, BA214061, Fub9NM, PM237745002, RHB1220KY |
| Specifications | 153.40 x 56.20 x 19.55 |
| Type | nickel_zinc |
| Battery Pack | 153.40 x 56.20 x 19.55 |
| Battery Type | nickel_zinc |
| Battery Capacity | 2000.00 milliamp_hours |
| Battery Voltage | 6.00 volts |
Questions about this item
How much power does the 2000mAh nickel-zinc pack draw when the Liebherr Funkst FUB10XL remote runs all day?
The 6.0V 12.00Wh cell delivers its rated capacity without active cooling, so heat and power draw stay low during continuous crane operation.
What charger or adapter must I already own to recharge this 6.0V replacement pack?
Use the original Liebherr Funkst charging cradle or a 6.0V nickel-zinc compatible charger; the pack has no built-in charge circuit.
Will the 153.40 x 56.20 x 19.55mm dimensions fit the battery compartment of my older FUB10AA or FUB78AA handset?
Yes, the pack matches the original BA14061 footprint and connects to the same terminals used on FUB10AA, FUB78AA and Radiomatic models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
