Cameron Sino 2000mAh 10.8V Li-ion Battery for Shark Ion W1 Cord WV200 WV200UK WV201 WV205 WV220
Replacement lithium-ion battery for Shark Ion W1 Cord and WV-series vacuums, 2000mAh at 10.8V with built-in protection circuits
- Specifications143.12 x 45.50 x 38.40
- Typelithium_ion
- Battery Pack143.12 x 45.50 x 38.40
- Battery Typelithium_ion
- Battery Capacity2000.00 milliamp_hours
- Battery Voltage10.80 volts
- Compatible with Shark Ion W1 Cord, WV200, WV200UK, WV201, WV205, WV220 vacuums
- 2000mAh lithium-ion capacity delivers 21.60Wh runtime for extended cleaning
- 8V voltage matches original Shark XFBT200 specifications exactly
- Built-in protection against overcharge, over-discharge and short circuit
- Compact 143.12 x 45.50 x 38.40mm design fits original battery compartment
Replacement Battery for Shark Ion W1 Cord Vacuums
This 10.8 V lithium-ion pack delivers 2000 mAh and 21.60 Wh to restore runtime on compatible Shark cordless models. It matches the original XFBT200, XFBT200EU and XFBT200J part numbers and includes a decoded chip for direct communication with the vacuum. The cell chemistry is lithium-ion and the unit weighs 181.8 g with dimensions of 143.12 x 45.50 x 38.40 mm.
Compatibility Check Before Ordering
Verify that your vacuum carries one of the listed model numbers: Ion W1 Cord, WV200, WV200UK, WV201, WV205 or WV220. Confirm the original battery part number is XFBT200, XFBT200EU or XFBT200J to ensure the connector and form factor align. The supplier advises two to three full charge and discharge cycles before the pack reaches its rated capacity. Buyers who need a different voltage, capacity or physical size should not order this pack.
Sustained Load Behaviour
The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short-circuit events during extended cleaning sessions. This helps maintain stable output as the motor draws continuous current rather than short bursts. The manufacturer states each unit undergoes strict specification detection and use testing to ensure safe and durable operation under load. Do not store the battery above 60 °C or 140 °F to preserve long-term health.
Highlights
- Compatible with Shark Ion W1 Cord, WV200, WV200UK, WV201, WV205, WV220 vacuums
- 2000mAh lithium-ion capacity delivers 21.60Wh runtime for extended cleaning
- 8V voltage matches original Shark XFBT200 specifications exactly
- Built-in protection against overcharge, over-discharge and short circuit
- Compact 143.12 x 45.50 x 38.40mm design fits original battery compartment
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Ion W1 Cord, UV200CCO, WV200, WV200UK, WV201, WV205, WV220 |
| Part Number | XFBT200, XFBT200EU, XFBT200J |
| Specifications | 143.12 x 45.50 x 38.40 |
| Type | lithium_ion |
| Battery Pack | 143.12 x 45.50 x 38.40 |
| Battery Type | lithium_ion |
| Battery Capacity | 2000.00 milliamp_hours |
| Battery Voltage | 10.80 volts |
Questions about this item
Does the box contain the battery only, or are tools and a charger included?
The package includes one 2000mAh 10.8V lithium-ion battery with a decoded chip and shock-absorbing foam; installation tools and a charger are not supplied.
Which part number should I match — XFBT200, XFBT200EU or XFBT200J?
All three part numbers refer to the same 2000mAh 10.8V pack; choose the one printed on your original Shark battery label.
What run-time can I expect from the 21.60Wh rating in my Shark Ion W1?
The 21.60Wh capacity restores the original run-time for the Ion W1 Cord, WV200, WV200UK, WV201, WV205 and WV220 models; actual minutes depend on the vacuum's power setting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



