Cameron Sino 1500mAh 14.4V Battery for SKIL 3610, 3612, 3615, 3650, 3655, B2610
Replacement 1500mAh 14.4V rechargeable battery fits SKIL 3610, 3612, 3615, 3650, 3655 and B2610 power tools
- 1500mAh capacity extends tool runtime
- 4V output matches original SKIL specifications
- Compatible with SKIL 3610, 3612, 3615, 3650, 3655, B2610 models
- Built-in protection guards against overcharge and short circuit
- ISO9001, RoHS and CE certified for safety
Compatible SKIL Models
This 14.4 V, 1500 mAh replacement battery fits SKIL 3610, 3610-K10, 3612, 3615, 3650, 3655 and B2610 power tools. It matches the original part numbers including 2 607 335 210 and 2 610 995 883. The fully decoded chip communicates with the tool exactly like the factory pack. Builders who need a different voltage or a larger capacity should look elsewhere.
Sustained Operation
The pack delivers its rated 1500 mAh through continuous drilling or driving cycles without the voltage sag seen in worn originals. Overcharge, over-discharge, over-voltage and short-circuit protection circuits keep the cells balanced during long sessions. A new unit reaches full capacity after two or three complete charge and discharge cycles. Users who run tools all day on a single pack will still need a second battery.
Upgrade From Worn Packs
It replaces an exhausted SKIL 14.4 V pack that no longer holds a charge or triggers the tool's low-voltage cut-off early. The physical dimensions of 108.28 x 53.63 x 119.43 mm and 579.5 g weight match the original housing so the tool balance is unchanged. The jump is worth it when run time has dropped below useful levels. It does not add capacity beyond the original 1500 mAh specification.
Highlights
- 1500mAh capacity extends tool runtime
- 4V output matches original SKIL specifications
- Compatible with SKIL 3610, 3612, 3615, 3650, 3655, B2610 models
- Built-in protection guards against overcharge and short circuit
- ISO9001, RoHS and CE certified for safety
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | 2 607 335 210, 2 607 335 252, 2 610 995 883, 26156801, 26156801 14.4 Volt, BAT015, GSR 14.4 VE-2(old model only), PSR14.4 VES-2, PSR14.4VES-2, VPE-2 |
| Part Number | 2 607 335 160, 2 607 335 210, 2 607 335 246, 2 607 335 252, 2 610 995 883, BAT013, BAT015 |
Questions about this item
Does the 1500mAh 14.4V pack run hot or lose capacity after a full day of drilling?
The 1500mAh 14.4V lithium-ion cell is built with overcharge, over-discharge, over-voltage and short-circuit protection, so it stays cool and holds capacity during extended use.
What charger and tool models must I already own for this battery to work?
You need a SKIL 14.4V charger and one of the listed tools — 3610, 3610-K10, 3612, 3615, 3650, 3655 or B2610 — because the pack uses the original SKIL slide-on connector.
Will the 108.28 x 53.63 x 119.43 mm case fit my older SKIL 3610 without forcing the latch?
Yes, the replacement matches the original dimensions and part numbers 2 607 335 160, 2 607 335 210, 2 607 335 246, 2 607 335 252 and 2 610 995 883, so it seats and latches exactly like the factory pack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
