Cameron Sino 1500mAh 10.8V Li-ion Battery for 07006522 S 10-A Power
1500 mAh 10.8 V lithium-ion replacement battery for compatible power-tool packs
- Parts1 Year
- 1500 mAh capacity powers tools longer
- 8 V lithium-ion chemistry matches original spec
- 40 x 46.66 x 50.68 mm form factor fits listed models
- Built-in protection guards against overcharge and short circuit
- ISO9001 certified production ensures consistent quality
Replacement battery for 07006522 power tools
This 10.8 V lithium-ion pack replaces the original 07006522 and S 10-A Power tool batteries. It delivers 1500 mAh and 16.20 Wh through a fully decoded chip that communicates with the tool exactly like the factory unit. The pack fits GDR, GLI, GMF, GSA, GSC, GUS, GWB and GWI 10.8 V-LI models as well as CLPK30-120 and CLPK31-120 kits.
Thermals noise and power draw in normal use
The battery integrates overcharge, over-discharge, over-voltage and short-circuit protection circuits that limit heat build-up during extended runs. No moving parts means silent operation in any orientation. The 165 g cell maintains stable voltage under load so the tool draws consistent current without thermal throttling.
Bundled protection and installation aids
Shock-absorbing foam in the package guards the cells against impact during transit. A 12-month warranty and 30-day money-back guarantee back the ISO9001-certified build quality. Online installation videos show the connector alignment steps so the pack seats correctly on the first attempt.
Highlights
- 1500 mAh capacity powers tools longer
- 8 V lithium-ion chemistry matches original spec
- 40 x 46.66 x 50.68 mm form factor fits listed models
- Built-in protection guards against overcharge and short circuit
- ISO9001 certified production ensures consistent quality
Specifications
| Parts | 1 Year |
|---|
Questions about this item
How do I install the 10.8 V Li-ion battery in my S 10-A Power tool, and what step is often missed?
Slide the battery onto the tool's rail until the latch clicks, then verify the connector is fully seated; the step people skip is confirming the electrical contact is properly engaged before use.
What maintenance will this 1500 mAh replacement battery need over its life?
Perform 2 or 3 full charge and discharge cycles when new to reach peak capacity, avoid low-quality third-party chargers, and store the pack below 60 °C to preserve cell health.
What is the first limit I will hit when running this 16.20 Wh pack continuously under load?
The built-in protection circuit will cut output if the cells exceed safe voltage, current or temperature thresholds, preventing over-discharge and short-circuit damage during sustained use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
