Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01002654BTC
In stock
Cameron Sino 15000mAh 55.50Wh Battery Autel MaxiSys Elite H81225WYQ VK398282PL
A 15000mAh lithium-polymer replacement battery for the Autel MaxiSys Elite diagnostic scanner, matching the original 3.7V specification and H81225WYQ part number
- Specifications181.35 x 82.50 x 7.65
- Typelithium_polymer
- Battery Pack181.35 x 82.50 x 7.65
- Battery Typelithium_polymer
- Battery Capacity15000.00 milliamp_hours
- Battery Voltage3.70 volts
- 15000 mAh capacity powers extended diagnostic sessions
- 50 Wh energy rating matches original scanner requirements
- 7 V lithium-polymer chemistry fits Autel MaxiSys Elite
- 35 × 82.50 × 7.65 mm dimensions ensure direct replacement fit
- ISO 9001, RoHS and CE certified for safety compliance
Direct Replacement for Autel MaxiSys Elite
This Cameron Sino lithium-polymer battery matches the original 15000mAh capacity and 3.7V output for the Autel MaxiSys Elite scanner. It carries the part numbers H81225WYQ and VK398282PL so technicians can verify fitment before purchase. The pack measures 181.35 x 82.50 x 7.65mm and weighs 226.0g. A fully decoded chip ensures the scanner recognises the cell immediately.
Thermals Noise and Power Draw in Normal Use
The 55.50Wh lithium-polymer chemistry runs cool during typical diagnostic sessions and emits no audible noise because there are no moving parts. Self-discharge is low so the scanner remains ready between jobs without frequent top-ups. Over-charge, over-discharge, over-voltage and short-circuit protection circuits maintain stable voltage delivery throughout the working day. No fan or active cooling is required.
Sustained Load Behaviour
During extended multi-vehicle scans the battery maintains consistent voltage thanks to its protection circuitry and high-capacity cells. A new pack reaches peak runtime after two or three full charge cycles as noted by the manufacturer. The shock-absorbing foam packaging protects the cell from transit damage that could degrade long-term performance. Buyers needing a higher capacity than 15000mAh or a different voltage platform cannot use this model.
Highlights
- 15000 mAh capacity powers extended diagnostic sessions
- 50 Wh energy rating matches original scanner requirements
- 7 V lithium-polymer chemistry fits Autel MaxiSys Elite
- 35 × 82.50 × 7.65 mm dimensions ensure direct replacement fit
- ISO 9001, RoHS and CE certified for safety compliance
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | MaxiSys Elite |
| Part Number | H81225WYQ, VK398282PL |
| Specifications | 181.35 x 82.50 x 7.65 |
| Type | lithium_polymer |
| Battery Pack | 181.35 x 82.50 x 7.65 |
| Battery Type | lithium_polymer |
| Battery Capacity | 15000.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
How do I install the replacement battery in my Autel MaxiSys Elite and what step do people miss?
Open the scanner, disconnect the old pack, align the 181.35 x 82.50 x 7.65 mm lithium-polymer unit, and firmly seat the connector — the step most people miss is fully clicking the connector into place before closing the case.
What maintenance will this 15000 mAh 3.7 V battery need later?
Run two or three full charge-and-discharge cycles when new, then avoid deep discharges and store below 60 °C; the built-in protection circuit handles over-charge, over-discharge, over-voltage and short-circuit safety.
What limit appears first during a long diagnostic session with this 55.50 Wh pack?
The 3.7 V lithium-polymer chemistry will hit its thermal ceiling before the protection circuit triggers, so sustained heavy loads are limited by heat rather than the 15000 mAh capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
