Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00994924BTC
In stock
Cameron Sino 1400mAh 7.4V Battery for Dolphin 9700 Handheld PN 200-0032-31
Replacement nickel-zinc battery delivers 1400 mAh at 7.4 V for Dolphin 9700 handheld barcode scanners
- Specifications70.00 x 41.15 x 21.85
- Typenickel_zinc
- Battery Pack70.00 x 41.15 x 21.85
- Battery Typenickel_zinc
- Battery Capacity1400.00 milliamp_hours
- Battery Voltage7.40 volts
- 1400mAh capacity powers the Dolphin 9700 scanner through full shifts
- 4V nickel-zinc chemistry matches original voltage for stable operation
- Dimensions 70.00 x 41.15 x 21.85mm fit the battery bay exactly
- Replaces OEM part 200-0032-31 with a fully decoded chip
- ISO9001, RoHS and CE certified for safety compliance
Compatible Replacement for Dolphin 9700 Handheld
This Cameron Sino battery replaces the original power pack in the Dolphin 9700 handheld barcode scanner. It delivers 1400mAh at 7.4V using nickel-zinc chemistry. The pack measures 70.00 x 41.15 x 21.85mm and weighs 85g. It is suited for workers who need a direct swap for a depleted or ageing cell.
Verify Model and Part Number Before Ordering
Confirm that your scanner is the Dolphin 9700 and that the original battery carries part number 200-0032-31. The replacement also matches references EBA-233301 and IR430850. A new cell reaches full capacity after two or three complete charge and discharge cycles. Ensure the connector seats firmly during installation.
Built-In Protection and Secure Packaging
The battery integrates overcharge, over-discharge, over-voltage and short-circuit protection circuits. A fully decoded chip communicates with the scanner exactly as the original did. Each unit ships in shock-absorbing foam to guard against transit damage. The pack is certified to ISO9001, RoHS and CE standards.
Highlights
- 1400mAh capacity powers the Dolphin 9700 scanner through full shifts
- 4V nickel-zinc chemistry matches original voltage for stable operation
- Dimensions 70.00 x 41.15 x 21.85mm fit the battery bay exactly
- Replaces OEM part 200-0032-31 with a fully decoded chip
- ISO9001, RoHS and CE certified for safety compliance
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | MJR-7000, MJR-7000EZ, MJR-8000, MJR-8000N, MJR810, MJR-BIO Biometric Totalizer, Stromberg SJX-8000 |
| Part Number | EBA-233301, IR430850 |
| Specifications | 70.00 x 41.15 x 21.85 |
| Type | nickel_zinc |
| Battery Pack | 70.00 x 41.15 x 21.85 |
| Battery Type | nickel_zinc |
| Battery Capacity | 1400.00 milliamp_hours |
| Battery Voltage | 7.40 volts |
Questions about this item
Does the replacement battery include a charger or any installation tools?
The package contains one 1400mAh 7.4V nickel-zinc battery sized 70.00 x 41.15 x 21.85 mm and shock-absorbing foam for transit protection. No charger or tools are included.
Which Dolphin 9700 part number does this 1400mAh 7.4V battery replace?
It replaces Dolphin part number 200-0032-31 and fits the Dolphin 9700 handheld barcode scanner.
How long will the 10.36Wh capacity typically run a Dolphin 9700 scanner in daily use?
Runtime depends on scan frequency, screen brightness and radio settings; the 1400mAh 7.4V pack restores the original capacity the device was designed for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
