Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00994721BTC
In stock
Cameron Sino 1400mAh 12V Battery TER51140 for Minelab Excalibur
Replacement 12 V 1400 mAh battery pack for Minelab Excalibur metal detectors, 108.42 × 34.10 × 32.00 mm, 228.5 g
- Specifications108.42 x 34.10 x 32.00
- Battery Pack108.42 x 34.10 x 32.00
- Battery Capacity1400 milliamp_hours
- Battery Voltage12 volts
- Compatible with Minelab Excalibur 1000, 800, II, PODS and SWORD detectors
- 1400 mAh capacity at 12 V delivers 16.80 Wh of runtime
- ISO9001, RoHS and CE certified for safety and quality
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Exact-fit dimensions 108.42 x 34.10 x 32.00 mm for direct replacement
Compatible replacement battery for Minelab
This 12 V, 1400 mAh rechargeable pack replaces the original TER51140 cell in the Excalibur 1000, Excalibur 800, Excalibur II, Excalibur II PODS and Excalibur SWORD models. It matches the original dimensions of 108.42 x 34.10 x 32.00 mm and weighs 228.5 g. A built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits. The unit is certified to ISO 9001, RoHS and CE standards.
Suits owners needing a direct drop-in replacement
Detectorists who want a factory-spec power source without soldering or adapter cables will find this pack fits the battery compartment exactly. Buyers whose device uses a different voltage, capacity or connector should look elsewhere. The pack is sold as a single unit, so users requiring a spare pair must order two separately.
Steady output during long search sessions
The 16.80 Wh capacity delivers consistent 12 V power throughout extended detecting periods rather than fading after a brief burst. The decoded chip communicates with the detector’s charging logic so the battery reaches full performance after two or three complete charge cycles. Storage above 60 °C is not recommended.
Highlights
- Compatible with Minelab Excalibur 1000, 800, II, PODS and SWORD detectors
- 1400 mAh capacity at 12 V delivers 16.80 Wh of runtime
- ISO9001, RoHS and CE certified for safety and quality
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Exact-fit dimensions 108.42 x 34.10 x 32.00 mm for direct replacement
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Excalibur 1000, Excalibur 800 Metal Detector, Excalibur II Metal Detector, Excalibur II PODS, Excalibur SWORD, Sword detector |
| Part Number | TER51140 |
| Specifications | 108.42 x 34.10 x 32.00 |
| Battery Pack | 108.42 x 34.10 x 32.00 |
| Battery Capacity | 1400 milliamp_hours |
| Battery Voltage | 12 volts |
Questions about this item
What Minelab detector models accept the TER51140 battery pack?
The TER51140 fits Minelab Excalibur 1000, Excalibur 800, Excalibur II, Excalibur II PODS, Excalibur SWORD and Sword detectors.
Will the TER51140 work in an original Excalibur 800 without modification?
Yes, the pack matches the original 12 V, 1400 mAh specification and dimensions of 108.42 x 34.10 x 32.00 mm for direct replacement.
How can I confirm the battery is delivering its rated 16.80 Wh after installation?
After two or three full charge and discharge cycles the detector should reach its normal runtime; the built‑in protection circuit prevents over‑charge and over‑discharge.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
