We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino 1200mAh 3.7V Li-Polymer Battery for Minn Kota iPilot Link Remote BT APP00176

SKU CH-NWKH-HM5H6

1200 mAh 3.7 V lithium-polymer replacement battery for Minn Kota iPilot Link Remote BT, 52 × 34 × 7 mm

  • Specifications52.00 x 34.00 x 7.00
  • Typelithium_polymer
  • Battery Pack52.00 x 34.00 x 7.00
  • Battery Typelithium_polymer
  • Battery Capacity1200.00 milliamp_hours
  • Battery Voltage3.70 volts
  • Replacement battery certified to ISO9001, RoHS and CE standards
  • 1200 mAh 3.7 V lithium-polymer cell delivers 4.44 Wh capacity
  • Slim 52 × 34 × 7 mm profile fits iPilot Link Remote BT
  • New decoded chip works like the original battery
  • Protective foam packaging guards the cell during transport

Direct replacement for Minn Kota iPilot Link

This 1200mAh lithium-polymer cell matches the original 3.7V specification and 52.00 x 34.00 x 7.00mm form factor. It is built for owners of the 2018 iPilot Link remote who need a new power source. The pack includes a fully decoded chip so the remote recognises it immediately.

Steady capacity through a full day on the water

The 4.44Wh rating delivers consistent voltage during long trolling sessions rather than a brief burst. Overcharge, over-discharge, over-voltage and short-circuit protection circuits maintain stable output across repeated charge cycles. A fresh unit reaches peak runtime after two or three complete charge and discharge cycles.

Light weight and safe operating limits

At 22.0g the cell adds negligible mass to the handheld remote. The chemistry is certified to ISO9001, RoHS and CE standards and must not be stored above 60°C. The pack ships in shock-absorbing foam to prevent transit damage.

Highlights

  • Replacement battery certified to ISO9001, RoHS and CE standards
  • 1200 mAh 3.7 V lithium-polymer cell delivers 4.44 Wh capacity
  • Slim 52 × 34 × 7 mm profile fits iPilot Link Remote BT
  • New decoded chip works like the original battery
  • Protective foam packaging guards the cell during transport

Specifications

BrandCameron Sino
ModeliPilot Link (2018), iPilot Link Remote BT
Part NumberAPP00176, APP176180321450
Specifications52.00 x 34.00 x 7.00
Typelithium_polymer
Battery Pack52.00 x 34.00 x 7.00
Battery Typelithium_polymer
Battery Capacity1200.00 milliamp_hours
Battery Voltage3.70 volts

Questions about this item

Does the 3.7 V lithium-polymer cell generate noticeable heat during a full day on the water?

The 1200 mAh pack is designed to run at 3.7 V with built-in overcharge, over-discharge and short-circuit protection, so it stays cool under normal remote use.

What must I already own to install this replacement battery?

You need the Minn Kota iPilot Link Remote BT handset (model year 2018) and a small screwdriver to open the battery compartment and connect the existing plug.

Will the decoded chip in this pack work with the original Minn Kota APP00176 remote firmware?

Yes, the fully decoded chip is made to the exact specifications of the original battery, so it communicates properly with the existing remote electronics.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.