Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00999038BTC
In stock
Cameron Sino 11400mAh 9.6V Li-Polymer Battery for Climet CI-150t/152x/153/154/155/156/450/454/750t PN 800424
Replacement lithium-polymer battery delivering 11400 mAh at 9.6 V for Climet CI-150t, CI-152x, CI-153, CI-154, CI-155, CI-156, CI-450, CI-454 and CI-750t particle counters
- Specifications133.00 x 110.00 x 36.00
- Typelithium_polymer
- Battery Pack133.00 x 110.00 x 36.00
- Battery Typelithium_polymer
- Battery Capacity11400.00 milliamp_hours
- Battery Voltage9.60 volts
- 11400mAh capacity powers Climet particle counters for longer sessions
- 6V lithium-polymer chemistry matches original equipment specifications
- Fits CI-150t, CI-152x, CI-153, CI-154, CI-155, CI-156, CI-450, CI-454, CI-750t models
- 133 x 110 x 36 mm form factor drops straight into the battery bay
- ISO 9001 certified production with overcharge, over-discharge and short-circuit protection
Replacement Battery for Climet Particle Counters
This lithium-polymer battery replaces the original 9.6 V 11400 mAh pack used in Climet CI-150t, CI-152x, CI-153, CI-154, CI-155, CI-156, CI-450, CI-454 and CI-750t instruments. It matches the OEM part number 800424 and is supplied new with a fully decoded chip that communicates with the host device exactly like the factory cell. The pack measures 133.00 x 110.00 x 36.00 mm and carries ISO9001 certification.
Capacity and Runtime Headroom
At 11400 mAh and 109.44 Wh the cell delivers the same energy budget as the original battery, so existing charge-cycle expectations remain unchanged. It will power a compatible particle counter through a full shift under typical indoor or outdoor sampling loads. Runtime shortens when the instrument runs continuous high-flow sampling or operates in cold environments, and the pack cannot be paralleled for extended capacity.
Thermal Behaviour and Power Draw
Lithium-polymer chemistry keeps self-discharge low during storage and the internal protection circuit guards against over-charge, over-discharge, over-voltage and short-circuit events. In normal operation the pack runs at the instrument's native 9.6 V rail without generating noticeable heat or requiring active cooling. No external charger is included; the host device manages charging through its standard connector.
Highlights
- 11400mAh capacity powers Climet particle counters for longer sessions
- 6V lithium-polymer chemistry matches original equipment specifications
- Fits CI-150t, CI-152x, CI-153, CI-154, CI-155, CI-156, CI-450, CI-454, CI-750t models
- 133 x 110 x 36 mm form factor drops straight into the battery bay
- ISO 9001 certified production with overcharge, over-discharge and short-circuit protection
Specifications
| Brand | cameron sino |
|---|---|
| Model | Wiper i130S CI-152x CI-153 CI-154 CI-155 CI-156 CI-450 CI-450 Portable Particle Counter CI-454 Portable Particle Counter CI-750t |
| Part Number | Wiper 800424 |
| Specifications | 133.00 x 110.00 x 36.00 |
| Type | lithium_polymer |
| Battery Pack | 133.00 x 110.00 x 36.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 11400.00 milliamp_hours |
| Battery Voltage | 9.60 volts |
Questions about this item
Will this 11400mAh 9.6V pack fit the Climet CI-152x I already use?
The battery is listed as a direct replacement for the Climet CI-152x and shares the original part number 800424, so it matches the compartment and connector of that model.
How can I verify the 9.6V output is healthy after I install it?
After fitting the pack, run the particle counter through a full charge and discharge cycle; the device should report its normal operating voltage and hold a charge consistent with the 109.44Wh rating.
Does the box include a charger or only the 133 x 110 x 36 mm battery?
The package contains one lithium-polymer battery measuring 133.00 x 110.00 x 36.00 mm; a charger is not included and must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
