Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00999543BTC
In stock
Cameron Sino 1050mAh 3.7V Li-ion Battery for C-LUX 2/3
Replacement lithium-ion battery for C-LUX 2 and 3 cameras, 1050mAh at 3.7V with decoded chip and protection circuits
- Specifications40.60 x 36.26 x 7.10
- Typelithium_ion
- Battery Pack40.60 x 36.26 x 7.10
- Battery Typelithium_ion
- Battery Capacity1050.00 milliamp_hours
- Battery Voltage3.70 volts
- 1050 mAh capacity extends shooting time
- 7 V lithium-ion chemistry matches original spec
- 60 × 36.26 × 7.10 mm form factor fits C-LUX 2 and 3
- ISO 9001, RoHS and CE certified for safety
- Fully decoded chip works like the original battery
Replacement Battery for C-LUX 2 and 3
This lithium-ion cell replaces the original BP-DC6 series pack in Leica C-LUX 2 and C-LUX 3 cameras. It delivers a 1050mAh capacity at 3.7V for 3.9Wh of energy. The fully decoded chip communicates with the camera exactly like the factory unit, so the fuel gauge and remaining-shot count work normally. Photographers who need a spare or a fresh primary battery for these models will find a direct fit.
Thermal and Power Behaviour in Use
The cell uses standard lithium-ion chemistry and runs at typical temperatures during normal shooting and playback. No active cooling is required and the pack generates no audible noise. Internal protection guards against overcharge, over-discharge, over-voltage and short circuits, which helps maintain safe operation and extends service life. The battery reaches its rated capacity after two or three full charge cycles.
What the Included Extras Provide
The retail box contains a single battery wrapped in shock-absorbing foam for transit protection. No charger, cable or software disc is supplied. The foam insert helps prevent physical damage during shipping but does not alter electrical performance. Installation is straightforward; many users follow online video guides to seat the connector correctly. Buyers who need a dedicated charger or multi-bay station must purchase those separately.
Highlights
- 1050 mAh capacity extends shooting time
- 7 V lithium-ion chemistry matches original spec
- 60 × 36.26 × 7.10 mm form factor fits C-LUX 2 and 3
- ISO 9001, RoHS and CE certified for safety
- Fully decoded chip works like the original battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Caplio CX1, Caplio CX2, Caplio R10, Caplio R6, Caplio R7, Caplio R8 |
| Part Number | DB-70 |
| Specifications | 40.60 x 36.26 x 7.10 |
| Type | lithium_ion |
| Battery Pack | 40.60 x 36.26 x 7.10 |
| Battery Type | lithium_ion |
| Battery Capacity | 1050.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
How do I fit the 40.60 x 36.26 x 7.10 mm pack into my C-LUX 2, and what step is often missed?
Open the battery door, align the contacts with the camera terminals, press the pack in until it clicks, then verify the 3.70 V label faces outward so the decoded chip engages.
What will the 1050mAh lithium-ion cell need later to keep working?
After 2 or 3 full charge cycles the cell reaches peak capacity; store it around 50 % charge if unused for weeks and avoid chargers not rated for 3.7 V to prevent premature ageing.
What limit appears first when I shoot continuously with the 3.9 Wh pack?
The 1050 mAh capacity sets runtime; sustained high-drain use will deplete the charge before any thermal threshold is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
