Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00995639BTC
In stock
Cameron Sino 102026 450mAh 1.67Wh 3.7V nickel-zinc battery
Replacement nickel-zinc battery for the Beoplay EQ charging case, 450 mAh and 1.67 Wh at 3.7 V
- Specifications25.90 x 19.20 x 9.00
- Typenickel_zinc
- Battery Pack25.90 x 19.20 x 9.00
- Battery Typenickel_zinc
- Battery Capacity450.00 milliamp_hours
- Battery Voltage3.70 volts
- Replaces the original Beoplay EQ Charging Case battery
- 450 mAh capacity restores full runtime
- 7 V nickel-zinc chemistry matches factory spec
- 90 × 19.20 × 9.00 mm fits the case exactly
- ISO 9001 certified production with decoded chip
Direct replacement for Beoplay EQ charging case
This Cameron Sino battery matches the original 102026 part number and fits the Beoplay EQ charging case. It uses nickel-zinc chemistry at 3.7 volts with 450 milliamp hours capacity. The pack measures 25.90 by 19.20 by 9.00 millimetres and weighs 9.0 grams. A fully decoded chip ensures the case recognises it like the factory cell.
Thermal and power behaviour in daily use
The cell delivers 1.67 watt-hours at 3.70 volts for typical listening sessions. Nickel-zinc chemistry runs cool during normal charge and discharge cycles. No active cooling is required inside the sealed charging case. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short circuit.
Bundled protection and installation support
The package includes shock-absorbing foam that protects the cell during transport. Installation videos are available online and show the connector alignment steps. A new battery reaches best performance after two or three full charge and discharge cycles. The supplier provides email support with a 24-hour reply commitment.
Highlights
- Replaces the original Beoplay EQ Charging Case battery
- 450 mAh capacity restores full runtime
- 7 V nickel-zinc chemistry matches factory spec
- 90 × 19.20 × 9.00 mm fits the case exactly
- ISO 9001 certified production with decoded chip
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Beoplay EQ Charging Case |
| Part Number | 102026 |
| Specifications | 25.90 x 19.20 x 9.00 |
| Type | nickel_zinc |
| Battery Pack | 25.90 x 19.20 x 9.00 |
| Battery Type | nickel_zinc |
| Battery Capacity | 450.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
How do I install this 102026 battery in my Beoplay EQ charging case and which step is often missed?
Open the case, disconnect the old pack, connect the new 3.7 V 450 mAh nickel-zinc battery ensuring the connector clicks fully into place, then close the case; the step most people miss is verifying the connector is fully seated before reassembly.
What maintenance will this 1.67 Wh nickel-zinc cell need over its life?
No scheduled maintenance is required; after the first 2 or 3 full charge and discharge cycles the cell reaches its best performance, then simply avoid low-quality chargers and storage above 60 °C to maximise lifespan.
What limit appears first when the charging case is used continuously at 3.7 V?
The 450 mAh capacity is the limiting factor; sustained use drains the 1.67 Wh pack until the protection circuit cuts power to prevent over-discharge.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
