Cameron & Co
Cameron & Co DS-CS-SST100SL battery 3.7V 800mAh for Sena SP105 SP88 Spider ST1 Spyder 1S
Replacement lithium-polymer battery delivers 3.7V and 800mAh for Sena SP105, SP88, Spider ST1 and Spyder 1S headsets
- TypeBluetooth Headset
- Li-Polymer chemistry provides stable 3.7V output
- 800mAh capacity delivers 2.96Wh runtime
- Direct fit for Sena SP105 SP88 Spider ST1 Spyder 1S
- Replaces OEM part AHB802540 exactly
- Compact 42.60 x 24.70 x 7.80 mm form factor
Compatible Sena headsets
This Cameron & Co DS-CS-SST100SL battery replaces the AHB802540 cell in Sena SP105, SP88, Spider ST1 and Spyder 1S wireless headsets. It is a direct-fit lithium-polymer pack built to the original dimensions of 42.60 x 24.70 x 7.80 mm. Riders who use these specific models can restore factory runtime with a single swap.
Sustained discharge profile
The 3.7 V, 800 mAh cell stores 2.96 Wh and uses Li-Polymer chemistry that holds voltage steadily during long intercom sessions. Internal resistance stays low enough to support continuous transmit cycles without the sharp sag seen in aged packs. Expect consistent talk time until the pack reaches its natural cut-off point.
Pre-installation checklist
Verify that your headset is one of the four listed models and that the original part number reads AHB802540. Confirm the connector orientation matches the black pack shown in the product images. Ensure you have the small tools needed to open the headset housing without damaging the seal.
Highlights
- Li-Polymer chemistry provides stable 3.7V output
- 800mAh capacity delivers 2.96Wh runtime
- Direct fit for Sena SP105 SP88 Spider ST1 Spyder 1S
- Replaces OEM part AHB802540 exactly
- Compact 42.60 x 24.70 x 7.80 mm form factor
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-SST100SL |
| Type | Bluetooth Headset |
Questions about this item
Does the 3.7 V 800 mAh Li-Polymer cell run hot during long rides?
The pack is rated at 2.96 Wh and fits the original 42.60 x 24.70 x 7.80 mm cavity, so heat output matches the factory specification for the Sena headset.
What must I already own to use this DS-CS-SST100SL battery?
You need a Sena SP105, SP88, Spider ST1 or Spyder 1S headset that currently uses the AHB802540 pack.
Will this 0.8 Ah replacement work alongside my original Sena charger and mount?
Yes, it is 100 % OEM compatible with the AHB802540 part number, so the existing charger and mounting points function unchanged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
