Cameron & Co
Cameron & Co DS-CS-MKT409PW 9.6V 1.5Ah Ni-MH battery
Ni-MH 9.6 V 1.5 Ah replacement battery for Makita 9.6 V tools and flashlights
- Reliable power for Makita tools with 9.6 V 1.5 Ah Ni-MH chemistry
- Direct replacement for part numbers 193889-4 9033 9034 and more
- Fits a wide range of drills and flashlights including 6095D DA391D ML902
- Compact 182.20 x 48.80 x 30.70 mm design slides into existing battery bays
- Brand new 100 % OEM compatible unit ready for immediate use
Replacement for Makita 9.6V tools
This 9.6V 1.5Ah Ni-MH battery replaces Makita part numbers 193889-4, 9033 and 9034. It fits drill models such as the 6095D, 4190D and DA391D, plus the ML902 flashlight. The pack is built to match the original 14.4Wh energy rating.
Black Ni-MH pack with slide mount
The black housing uses the same slide-on form factor as the OEM cells, so it locks onto the tool without adapters. Nickel-metal hydride chemistry avoids memory effect when the pack is recharged before full discharge. Dimensions are 182.20 x 48.80 x 30.70 mm for a direct fit in the battery bay.
Ni-MH limits for high-drain use
The 1500mAh capacity suits intermittent drilling and driving but will deplete faster under continuous heavy load than higher-capacity chemistries. Ni-MH self-discharge means the pack loses charge during long storage periods. The 9.6V nominal voltage matches the tool design, so no voltage mismatch occurs.
Highlights
- Reliable power for Makita tools with 9.6 V 1.5 Ah Ni-MH chemistry
- Direct replacement for part numbers 193889-4 9033 9034 and more
- Fits a wide range of drills and flashlights including 6095D DA391D ML902
- Compact 182.20 x 48.80 x 30.70 mm design slides into existing battery bays
- Brand new 100 % OEM compatible unit ready for immediate use
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS-CS-MKT409PW |
Questions about this item
What voltage does the 9.6V Ni-MH battery deliver to the tool?
The pack supplies a nominal 9.6 volts to compatible Makita tools, matching the original specification.
Will the 182.20 x 48.80 x 30.70 mm pack fit my 6095D drill?
Yes, those dimensions match the original 9.6V slide-on casing used on the 6095D and listed models.
How do I install the replacement 1.5 Ah pack without damaging the contacts?
Align the pack rails with the tool housing, slide it in until the latch clicks, and avoid forcing the terminals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
