We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel clevis hanger, 3 inch pipe size, brushed finish

Caddy

Caddy 4060300 Clevis Hanger 3 in 304 Stainless Steel 130 lb

SKU CH-NJYP-YG93C

Supports 3 in pipe with a 130 lb load capacity using 304 stainless steel construction

  • Material304 Stainless Steel
  • 304 stainless steel resists corrosion in wet environments
  • 130 lb load capacity secures 3 in pipe runs
  • 75 in overall height fits standard rod spacing
  • 13 in width clears adjacent fittings
  • Clevis design allows vertical adjustment after installation

3-inch Stainless Steel Clevis Hanger

The NVENT CADDY 4060300S4 is a clevis hanger designed for 3-inch pipe systems. It is built from 304 stainless steel for corrosion resistance. This support suits installers needing a standard threaded rod connection. It is not for pipes exceeding a 3 1/2-inch outside diameter.

Static Load Capacity and Dimensions

The hanger carries a 130 lb load capacity in normal use. Its overall height measures 6.75 in and overall width is 4.13 in. No moving parts or powered components generate noise or heat. The fixed geometry provides consistent support without adjustment.

304 Grade Material Benefits

The 304 stainless steel construction resists rust in damp or outdoor environments. This material choice extends service life compared to plain steel alternatives. No cushioned liner is included, so direct metal-to-pipe contact occurs. The finish requires no additional coating for typical installations.

Highlights

  • 304 stainless steel resists corrosion in wet environments
  • 130 lb load capacity secures 3 in pipe runs
  • 75 in overall height fits standard rod spacing
  • 13 in width clears adjacent fittings
  • Clevis design allows vertical adjustment after installation

Specifications

Material304 Stainless Steel
BrandNVENT CADDY

Questions about this item

How do I install the 4060300 clevis hanger and what step is commonly missed?

Thread a 1/2 in rod through the top hole, secure with nuts above and below the hanger, then close the clevis around the 3 in pipe — the step often missed is tightening both nuts so the 130 lb load rating is fully supported.

What maintenance will the 304 stainless steel hanger need over time?

Inspect the 304 stainless steel body and threaded rod connection periodically for corrosion or loosening; retighten the 1/2 in rod nuts if vibration causes movement, otherwise no scheduled replacement is required.

What limit appears first when the hanger carries a continuous 130 lb load?

The 130 lb load capacity is the governing limit — sustained loading at that level should not be exceeded, as the 304 stainless steel clevis and 1/2 in rod connection are rated for this maximum.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.