We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel swivel loop hanger with adjustable band, five inch pipe size

Caddy

Caddy 1150500EG Swivel Loop Hanger 5 In

SKU CH-6196-Z3YVX

Adjustable swivel loop hanger supports 5 in. stationary non-insulated pipe up to 1000 lb. load with pre-galvanised steel construction

  • Pre-galvanised steel resists corrosion on pipe runs
  • Swivel loop adjusts to fit 5-inch pipe diameter
  • Supports stationary non-insulated lines up to 1000 lb load
  • UL Listed and FM Approved for code compliance
  • Meets MSS SP-58 Type 1 and Federal Spec WW-H-171

5-Inch Swivel Loop Hanger

The NVENT CADDY 1150500EG is a pre-galvanised steel hanger built to suspend stationary non-insulated pipe lines. It fits a nominal 5 inch pipe size and attaches to a half-inch threaded rod. The swivel loop allows angular adjustment during installation. It is UL listed and FM approved for fire protection and mechanical applications.

Build Quality and Mounting Implications

Pre-galvanised steel construction resists corrosion in indoor mechanical rooms. The adjustable band tightens around the pipe without disassembly of the rod. A 1/2 inch rod thread matches standard strut and trapeze hardware. The swivel head absorbs minor pipe movement while maintaining vertical alignment. Metal detectable material aids post-installation inspection.

Decisive Specification: 1000 Lb Maximum Load

The rated capacity of 1000 pounds determines whether this hanger suits the pipe weight, fluid content and spacing of your system. Exceeding this value risks structural failure and code violation. Installers must calculate total load per support point before specifying this model. The hanger conforms to MSS SP-58 Type 1 and Federal Specification WW-H-171 Type 1.

Highlights

  • Pre-galvanised steel resists corrosion on pipe runs
  • Swivel loop adjusts to fit 5-inch pipe diameter
  • Supports stationary non-insulated lines up to 1000 lb load
  • UL Listed and FM Approved for code compliance
  • Meets MSS SP-58 Type 1 and Federal Spec WW-H-171

Specifications

BrandNVENT CADDY

Questions about this item

What load does the 1/2 in rod support on the 1150500EG swivel loop hanger?

The pre-galvanised steel hanger carries a maximum load of 1000 lb on its 1/2 in threaded rod while meeting UL and FM requirements.

What clearance does the 9.80 in wide band need around a 5 in pipe?

The adjustable band wraps the pipe with a 9.80 in overall width, so allow at least that much lateral space for the swivel loop to rotate freely.

How do you level the hanger after threading it onto the 1/2 in rod?

Turn the swivel nut until the band sits level, then tighten the locknut against the hanger body — skipping the locknut lets vibration rotate the assembly out of alignment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.