We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three clear plastic bending forms for 12mm tubing marked 45 90 180 degrees

Bykski

Bykski Rigid Tubing Bending Kit 12mm OD 45/90/180 Degree

SKU CH-B1VS-B0MS5

Creates precise 45, 90 and 180 degree bends in 12 mm OD rigid tubing for custom loops

  • TypeCPU Block
  • Make consistent 45-degree bends with the included 12 mm tool
  • Achieve precise 90-degree angles using the dedicated 12 mm insert
  • Form smooth 180-degree loops with the third 12 mm former
  • Works with PETG, PMMA and copper tubing of 12 mm outer diameter
  • Mounting holes let you fix the kit to a bench for repeatable results

Bykski 12 mm Rigid Tubing Bending Kit

The Bykski Rigid Tubing Bending Kit contains three forming tools sized for 12 mm outer-diameter rigid tube. Each tool produces a fixed angle of 45, 90 or 180 degrees so builders can create consistent bends in PETG, PMMA or copper tubing. Mounting holes let the tools be bolted to a bench for repeatable results.

Suited for custom-loop builders using 12 mm rigid

This kit only works with 12 mm OD material; it cannot form accurate bends for other tubing diameters. Buyers working with soft tubing or different rigid sizes need a separate solution. The tools require a heat source and practice on scrap pieces before use on final loop runs.

Fixed-angle formers for 45, 90 and 180 degree bends

Each former locks the heated tube into one precise angle, removing guesswork from complex routing. The 180 degree tool enables tight U-turns while the 45 and 90 degree tools handle standard direction changes. Mounting holes allow a permanent workstation setup for batch bending.

Highlights

  • Make consistent 45-degree bends with the included 12 mm tool
  • Achieve precise 90-degree angles using the dedicated 12 mm insert
  • Form smooth 180-degree loops with the third 12 mm former
  • Works with PETG, PMMA and copper tubing of 12 mm outer diameter
  • Mounting holes let you fix the kit to a bench for repeatable results

Specifications

TypeCPU Block

Questions about this item

What bend angles can I make with the 12 mm OD rigid tubing using this kit?

The kit includes dedicated tools for 45, 90 and 180 degree bends, letting you form those exact angles in PETG, PMMA or copper tubing.

Does the bending kit require any special mounting interface or standard to operate?

Each tool has built-in mount holes so you can bolt it to a bench or board for a permanent workstation; no proprietary interface is needed.

What physical space do the three bending tools need on my workbench?

The tools are sized for 12 mm OD tubing and each has mount holes, so you only need enough flat area to secure the three pieces side by side.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.