We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent 1/2 inch NPTF two-port ball valve rated 7250 psi

Buyers Products Company

Buyers Products Company HBVS050 1/2 Inch NPTF 2-Port Ball Valve 7250 Psi

SKU CH-799G-4KQX8

A 1/2 inch NPTF two-port ball valve rated for 7250 psi high-pressure service

  • ColorTransparent
  • 1/2 inch NPTF threads for direct plumbing fit
  • 7250 psi rating handles extreme pressure loads
  • Two-port ball design gives quick on-off control
  • Transparent body lets you confirm flow visually
  • New condition ensures full factory performance

High-Pressure Ball Valve

This Buyers Products ball valve handles hydraulic pressure up to 7250 psi through a 1/2 inch NPTF thread. The two-port design directs flow in fluid-power circuits. It arrives new and ready for installation in compatible systems.

Suits High-Pressure Hydraulic Lines

Installers running 1/2 inch NPTF connections at 7250 psi will find the port count and pressure rating match. Builders needing a different thread standard, a three-way diverting pattern or a lower-pressure rating should look at other valves.

Fits 1/2 Inch NPTF Ports

The valve threads directly into 1/2 inch NPTF ports without adapters. Its 7250 psi rating supports high-pressure hydraulic circuits. The transparent colour helps confirm the valve position during system checks.

Highlights

  • 1/2 inch NPTF threads for direct plumbing fit
  • 7250 psi rating handles extreme pressure loads
  • Two-port ball design gives quick on-off control
  • Transparent body lets you confirm flow visually
  • New condition ensures full factory performance

Specifications

ColorTransparent
BrandBUYERS PRODUCTS

Questions about this item

What thread size must my existing piping have to connect to the 1/2 Inch NPTF ports on this valve?

The valve has two 1/2 Inch NPTF ports, so your piping must use matching 1/2 Inch NPTF threads for a proper seal.

Can the 7250 Psi rating handle pressure spikes from older hydraulic pumps I plan to keep in the circuit?

The 7250 Psi rating is the maximum working pressure; ensure your older pump’s peak output stays at or below that figure to avoid over-pressurising the valve.

How can I verify the ball valve is sealing correctly after installation?

Pressurise the system to its normal operating level and check both 1/2 Inch NPTF connections for leaks; a tight, drip-free joint confirms the valve is working as intended.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.