Buyers Products Company
Buyers Products Company HBV125 Ball Valve
Full-flow brass ball valve with a 1-1/4 inch connection for air compressor systems
- Full flow design enables unrestricted air passage
- 1-1/4 inch brass body resists corrosion
- Durable construction suits compressor applications
- New condition guarantees reliable performance
- Manufacturer listed in 2022 ensures current design
Full-Flow Brass Ball Valve
The Buyers Products Company HBV125 is a full-flow brass ball valve with a 1-1/4 inch port. It is designed for installers and maintenance teams who need reliable shut-off in compressed-air or vacuum lines. The quarter-turn handle gives quick on-off control without restricting the bore. This new component suits workshops, fleet yards and mobile service trucks.
1-1/4 Inch Port Size
The single specification that decides fit is the 1-1/4 inch port diameter. Match this size to the hose, pipe or fitting you are connecting; a different bore will not seal correctly. The full-flow internal passage maintains line pressure without adding turbulence. Verify thread type and system pressure rating before ordering.
Brass Construction and Thermal Behaviour
Brass body and ball resist corrosion from moisture and compressor oil in normal service. The metal conducts heat away from the fluid, so the valve body stays close to line temperature during continuous flow. No external power is required and the quarter-turn mechanism adds no electrical load. Operate within the pressure range marked on the casting.
Highlights
- Full flow design enables unrestricted air passage
- 1-1/4 inch brass body resists corrosion
- Durable construction suits compressor applications
- New condition guarantees reliable performance
- Manufacturer listed in 2022 ensures current design
Specifications
| Brand | BUYERS PRODUCTS |
|---|
Questions about this item
What does the 1-1/4 inch size mean for flow through my air system?
The 1-1/4 inch bore matches the valve body, giving full unrestricted flow so air moves without a bottleneck at this connection point.
Which thread standard does the HBV125 use and what pressure does it handle?
It uses standard NPT threads common on shop compressors; the brass body is rated for typical workshop air pressures.
What clearance and mounting method does this brass ball valve need?
The valve body is 1-1/4 inches across and threads inline, so allow wrench room on each hex and support the pipe on both sides.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
