We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel hydraulic flow control valve with NPT ports

Buyers Products Company

Buyers Products Company F1200S Hydraulic Flow Control Valve 25 gpm

SKU CH-3AS5-N9Z11

Regulates hydraulic flow up to 25 gpm with a carbon-steel body rated to 5,000 psi and 3/4 in NPT ports

  • Handles up to 25 gpm hydraulic flow
  • Withstands 5,000 psi maximum pressure
  • Carbon steel body resists wear and corrosion
  • 3/4 in NPT inlet and outlet connections
  • One-way control direction for precise flow regulation

Buyers Products F1200S Hydraulic Flow Control Valve

This new hydraulic flow control valve from Buyers Products Company is built for industrial plumbing systems that require regulated fluid movement. It handles a maximum flow rate of 25 gpm and a maximum pressure of 5,000 psi. The carbon steel body uses NPT connections on both inlet and outlet ports.

Suits systems needing one-way flow regulation

Installers managing hydraulic circuits up to 25 gpm and 5,000 psi will find this valve matches their spec. It is not for circuits that demand flow beyond 25 gpm, pressure above 5,000 psi, bi-directional control, or connection types other than NPT.

25 gpm capacity with 5,000 psi headroom

The valve comfortably regulates flow up to 25 gpm while withstanding 5,000 psi in carbon steel construction. It runs out of capacity when system demand exceeds 25 gpm or when pressure requirements surpass the 5,000 psi rating.

Highlights

  • Handles up to 25 gpm hydraulic flow
  • Withstands 5,000 psi maximum pressure
  • Carbon steel body resists wear and corrosion
  • 3/4 in NPT inlet and outlet connections
  • One-way control direction for precise flow regulation

Specifications

BrandBUYERS PRODUCTS

Questions about this item

What thread size and type must the hydraulic lines have to connect to the valve's NPT ports?

Both the inlet and outlet use 3/4-inch NPT threads, so hoses or fittings must match that size and taper.

Will the carbon-steel body handle a system that runs up to 5,000 psi without deformation?

Yes, the valve is rated for a maximum pressure of 5,000 psi, matching that operating limit.

How can I verify the valve is metering flow correctly once installed?

Install a flow meter downstream and confirm the reading stays at or below the 25 gpm maximum rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.