Buyers Products Company
Buyers Products Company 3011353 Standard Duty Tarp 7 ft 6 in x 15 ft 10 Mil Black
Standard-duty 10 mil vinyl tarp measuring 7 ft 6 in by 15 ft with double-stitched seams, brass grommets every 24 in and UV resistance
- TypeCanopies, Coverings & Outdoor Structures
- UV-resistant vinyl protects loads from sun damage
- Double-stitched, web-reinforced seams resist tearing under stress
- Brass grommets spaced 24 in apart give secure tie-down points
- 10 mil thickness with 12 oz/sq yd fabric weight balances strength and handling
- Finished size 7 ft 6 in x 15 ft covers equipment, trucks or outdoor storage
Standard Duty Tarp 7 ft 6 in x 15 ft
This standard duty tarp measures 7 ft 6 in by 15 ft with a 10 mil thickness. It is constructed from vinyl material featuring double stitched seams and web reinforcement. Brass grommets with a 3 in inside diameter are spaced every 24 in along the edges. The tarp weighs 12 oz per square yard and comes in black.
UV resistant cover for equipment
The UV resistant finish helps protect the material from sun degradation during outdoor exposure. It suits users needing a lightweight cover for firewood, machinery or short term ground protection. It is not waterproof or water resistant so buyers who need rain protection should look at a different product. The non breathable vinyl also makes it unsuitable for applications requiring airflow.
Check grommet spacing and material compatibility
Verify that the 24 in grommet spacing matches your tie down points or frame dimensions before ordering. Confirm that the 10 mil vinyl thickness meets the abrasion resistance required for your specific use case. Ensure the lack of water resistance is acceptable for the intended environment and that the black colour aligns with any visibility requirements you may have.
Highlights
- UV-resistant vinyl protects loads from sun damage
- Double-stitched, web-reinforced seams resist tearing under stress
- Brass grommets spaced 24 in apart give secure tie-down points
- 10 mil thickness with 12 oz/sq yd fabric weight balances strength and handling
- Finished size 7 ft 6 in x 15 ft covers equipment, trucks or outdoor storage
Specifications
| Brand | BUYERS PRODUCTS |
|---|---|
| Type | Canopies, Coverings & Outdoor Structures |
Questions about this item
What frame or structure is needed to support the 7 ft 6 in by 15 ft tarp?
The tarp uses brass grommets spaced 24 inches apart along the edges; you will need a frame, poles or anchor points that match that spacing and can accept rope, bungee cords or zip ties through the 3-inch grommet openings.
Can the standard-duty vinyl tarp be layered over an older poly cover without trapping moisture?
The material is not breathable, so placing it directly over another cover can trap condensation; leave an air gap or ventilate the older layer to prevent moisture build-up.
How do I verify the tarp is correctly tensioned after installation?
Check that the double-stitched, web-reinforced edges run straight, the brass grommets sit evenly at 24-inch intervals and the 10-mil vinyl shows no sagging or pooling when the cover is fully secured.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
