Bussmann
Bussmann OPM-1038R Fuse Block, Class CC, 30 A, 3 Pole
Holds three Class CC fuses up to 30 A at 600 V AC/DC with finger-safe box-lug terminals for 18 to 8 AWG wire on DIN rail or panel mount
- Indicating design shows fuse status at a glance
- Finger-safe construction protects against accidental contact
- DIN-rail and panel mounting offers flexible installation
- Accepts 18 to 8 AWG conductors for versatile wiring
- CSA, IEC and UL listed for code compliance
Three-pole Class CC fuse block
The Bussmann OPM-1038R is a three-pole fuse block rated for 30 A at 600 V AC or DC. It accepts Class CC fuses measuring 1-1/2 in by 13/32 in and suits industrial control panels, generator circuits and similar line-protection duties.
DIN-rail or panel mount with box-lug terminals
The thermoplastic body mounts on standard DIN rail or directly to a panel. Box-lug connectors accept 18 to 8 AWG wire and the finger-safe design reduces accidental contact during installation. Polarity-sensitive indicating versions require correct orientation to show fuse status.
Verify fuse series, voltage and wire gauge
Confirm the replacement fuse belongs to the ATDR, ATMR, ATQR, CCMR, FNQ-R, KLDR, KLKR, KTK-R or LP-CC series. Ensure the circuit does not exceed 600 V and that conductors fall within the 18 to 8 AWG range before ordering.
Highlights
- Indicating design shows fuse status at a glance
- Finger-safe construction protects against accidental contact
- DIN-rail and panel mounting offers flexible installation
- Accepts 18 to 8 AWG conductors for versatile wiring
- CSA, IEC and UL listed for code compliance
Specifications
| Brand | EATON BUSSMANN |
|---|
Questions about this item
How can I confirm the OPM-1038R is working correctly after installation?
Check that the built-in indicator shows no blown-fuse signal on each of the three poles, then verify continuity across the 18 to 8 AWG box-lug terminals with a multimeter while the circuit is de-energised.
What comes with the OPM-1038R and what must I source separately?
The package contains the three-pole indicating fuse block only; you must purchase Class CC fuses such as ATDR, ATMR, FNQ-R, KLDR, KLKR, KTK-R or LP-CC series and 18 to 8 AWG wire separately.
Which OPM-1038R version should I select for a 600 V, 30 A, three-phase circuit?
This single model is rated 600 V AC/DC, 30 A, three poles and accepts 1-1/2 in by 13/32 in Class CC fuses, so it matches those requirements directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
