Bussmann
Bussmann MDL-2/10-R 2/10A 250V Time-Delay Glass Fuse 5PK
A 2/10 A, 250 V AC time-delay glass fuse with a 10 kA interrupt rating at 125 V and 35 A at 250 V, supplied in a pack of five
- Time-delay operation handles motor start-up surges
- 250 V AC rating suits mains-powered equipment
- 10 kA interrupt capacity at 125 V AC
- 35 A interrupt capacity at 250 V AC
- Glass cylindrical body fits standard 1-1/4 in fuse holders
Bussmann MDL-2/10-R Time-Delay Glass Fuse
This Bussmann MDL-2/10-R is a cylindrical glass fuse rated at 2/10 A and 250 V AC with a time-delay characteristic. It comes in a pack of five and carries an interrupt rating of 35 A at 250 V AC and 10 kA at 125 V AC. The non-rejection body fits standard 1-1/4 in by 1/4 in fuse holders.
Suits low-current AC circuits needing surge
Buyers protecting control boards, instrumentation or small transformer primaries that experience brief inrush currents will match the 2/10 A time-delay rating. Installations requiring a fast-acting fuse, a higher current rating, a DC voltage rating or a rejection-style holder should look at a different part.
2/10 A time-delay rating at 250 V AC
The single specification that decides fit is the 2/10 ampere time-delay rating at 250 V AC. Verify that the circuit’s normal draw and inrush profile match this value before fitting the fuse.
Highlights
- Time-delay operation handles motor start-up surges
- 250 V AC rating suits mains-powered equipment
- 10 kA interrupt capacity at 125 V AC
- 35 A interrupt capacity at 250 V AC
- Glass cylindrical body fits standard 1-1/4 in fuse holders
Specifications
| Brand | BUSSMANN |
|---|
Questions about this item
Which amp rating should I pick for a 250 V AC circuit needing time-delay protection?
The MDL-2/10-R is a 2/10 A fuse rated for 250 V AC with time-delay characteristics, supplied in a pack of five.
What does the 10 kA interrupt rating at 125 V AC mean for my equipment?
It means the fuse can safely break a fault current up to 10 kA at 125 V AC without rupturing, protecting downstream components.
How does the 35 A interrupt rating at 250 V AC limit real-world use?
At the full 250 V AC rating the fuse is certified to interrupt only 35 A, so it suits low-energy circuits rather than high-fault mains.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
