We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Bussmann

Bussmann MDL-1/8-R Time Delay Glass Fuse 250VAC 1/8A 5PK

SKU CH-HMVX-6G81K

Pack of five 1/8 A time-delay glass fuses rated 250 V AC with 10 kA interrupt at 125 V and 35 A at 250 V

  • Time-delay action prevents nuisance trips from inrush currents
  • 250 V AC rating suits mains-powered equipment
  • 10 kA interrupt capacity at 125 V AC
  • 35 A interrupt capacity at 250 V AC
  • Glass body allows visual inspection of element

Bussmann MDL-1/8-R Time Delay Glass Fuse

This Bussmann MDL series fuse is a cylindrical glass cartridge rated at 1/8 ampere and 250 volts AC. It uses a time-delay characteristic to tolerate brief inrush currents without opening. The pack contains five new fuses for replacement or spares.

For low-current AC circuits needing time-delay

It suits maintenance on equipment specifying MDL, MDQ, MDV, MDX, Littelfuse 313, 315 or Mersen GDL, GDV series fuses. It is not for circuits requiring a fast-acting fuse, a higher interrupt rating at 250 V AC, or a different physical size.

35 A interrupt rating at 250 V AC

This fuse interrupts up to 35 amperes at its rated 250 V AC. At 125 V AC the interrupt rating rises to 10 kA. If the prospective fault current in your circuit exceeds 35 A at 250 V AC, this fuse cannot safely clear the fault.

Highlights

  • Time-delay action prevents nuisance trips from inrush currents
  • 250 V AC rating suits mains-powered equipment
  • 10 kA interrupt capacity at 125 V AC
  • 35 A interrupt capacity at 250 V AC
  • Glass body allows visual inspection of element

Specifications

BrandBUSSMANN

Questions about this item

Will the MDL-1/8-R fuse protect a legacy 125 V circuit that uses a 10 kA interrupt rating?

Yes, the fuse carries a 10 kA interrupt rating at 125 V AC, matching the requirement of older panels rated for that fault level.

How can I confirm the fuse is operating correctly once installed?

A good fuse shows continuity with a multimeter; after a fault the glass tube will appear darkened or the internal element will be visibly broken.

What comes in the pack and is any extra hardware needed?

The pack contains five 1/8 A, 250 V AC time-delay glass fuses; no additional holders or clips are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.