Bussmann
Bussmann MDL-1/100 Glass Fuse 0.01A 250V AC 35A 10kA 125V AC
A time-delay glass fuse rated 0.01 A at 250 V AC with a 35 A interrupt rating
- Time-delay design tolerates brief surges
- 01 A rating protects sensitive low-current circuits
- 35 A interrupt capacity at 250 V AC clears faults safely
- 10 kA interrupt capacity at 125 V AC handles higher fault energy
- Glass body allows visual inspection of element status
Glass Fuse for Low-Current Protection
This Bussmann MDL-series glass fuse is rated at 0.01 amperes and 250 volts AC. It suits equipment that requires a time-delay characteristic to withstand brief inrush currents without nuisance opening. The cylindrical, non-rejection body fits standard 1-1/4 inch by 1/4 inch fuse holders found in many instruments and control panels.
Cylindrical Glass Body Fits Standard Holders
The glass tube construction allows visual inspection of the element after a fault. Its non-rejection design means it inserts into any compatible clip or block without a keyed groove, simplifying replacement during maintenance. Equivalent series from Littelfuse and Mersen share the same physical dimensions, so sourcing a spare remains straightforward.
Time-Delay Element Limits Nuisance Blows
The fuse carries a 35-ampere interrupting rating at 250 volts AC and a 10-kiloampere rating at 125 volts AC. In normal operation the time-delay element absorbs short transients, reducing unnecessary downtime. Power dissipation stays low because the continuous current is only one-hundredth of an ampere, so heat and noise are negligible in the circuit.
Highlights
- Time-delay design tolerates brief surges
- 01 A rating protects sensitive low-current circuits
- 35 A interrupt capacity at 250 V AC clears faults safely
- 10 kA interrupt capacity at 125 V AC handles higher fault energy
- Glass body allows visual inspection of element status
Specifications
| Brand | EATON BUSSMANN |
|---|
Questions about this item
What interrupt rating does the 0.01 A MDL glass fuse carry at 250 V AC?
The fuse is rated to interrupt 35 A at 250 V AC and 10 kA at 125 V AC.
What physical size and body style does this fuse use?
It is a cylindrical glass fuse measuring 1-1/4 in long by 1/4 in diameter.
How is this non-rejection time-delay fuse installed and what common mistake should be avoided?
Insert the fuse into a compatible 1/4 in diameter holder until fully seated; do not force a rejection-type fuse into a non-rejection clip.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
